By: Sentech
Industrial, USB, & Medical Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
GigE Color Camera
The Sentech STC-GEC33A is part of Sentech's Standard GigE camera line. It features a 1/3" color VGA sensor, 90fps and communication over a 6 pin Hirose or Ethernet connector.

The Sentech STCGEC33A boasts precision housing with accurate CCD alignment, a DC Auto Iris Lens Driver, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™.

Resolution VGA (0.3 MegaPixel)
Image Sensor 1/3" Interline CCD (ICX424AQ)
Signal Format Progressive: Color
Frame Rate 90 fps
Active Picture Element 648 (H) x 494 (V)
Cell Size (um) 7.4 (H) x 7.4 (V) μm
Vertical Frequency 89.91172 Hz at full resolution; 0.72028 to 360.33325 Hz adjustable via the communication
Horizontal Frequency 47.2028 kHz
Pixel Frequency 36.818175 MHz
Sync System Internal
Video Output Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
Interface IEEE802.3 (1000BASE-T)
Protocol GigE Vision® 1.2 and GenICam™ 2.0 compliant
ALC Auto iris lens, electronic iris and AGC (ON/OFF)
Communication UART Communication through Ethernet port
Trigger Mode Edge Preset Trigger / Pulse Width Trigger (unlimited extended exposure)
Shutter Speed Preset continuous mode: 10 usec to 16,777,216 usec; Preset trigger mode: 10 usec to 16,777,216 usec; Pulse
Minimum Illumination 25.75 Lux at F1.2. 89.91172 Hz
Gain 0 to 20.4 dB
Noise Level @ 8bit Output: ≤ 3 Digit (Gain 0dB), @ 10bit Output: ≤ 12 Digit (Gain 0dB), @ 12bit Output: ≤ 48 Digit (Gain 0dB)
Gamma 1.0 (Factory default) or uploadable gamma table
AOI Function AOI setting adjustable via the communication
Smear Reduction ON/OFF selectable via the communication
Color Interpolation Available on RGB output
WhiteBalance Auto, manual and push-to-set white balance is available on both Raw data output and RGB output
Auto Iris Lens Control DC IRIS control input with video level target, peak/average and zone weight settings via the communication
Lens Mount C Mount
Connectors RJ45 connector; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent; DC IRIS lens connector: M1951 (EMUDEN) or equivalent
Optical Filter IR Cut Filter on
Shock 38G (3 directions, 3 times each)
Vibration 10G (20 to 200Hz)
Power Input Voltage: 10.8 to 26.4 Vdc, Consumption: < 5.0 W
Operating Temperature -5°C ~ 35°C
Storage Temperature -30°C ~ 65°C
Dimensions 35 (W) x 35 (H) x 50.6 (D) mm excluding connectors
Weight 120g

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.