Search
By: Crestron
http://www.avsupply.com/images/logos/crestron-logo.jpg
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101, sales@avsupply.com, or fax (858) 300-4193
Compact Control System with Ethernet

The Crestron CP2E is a compact Ethernet control system designed for small to medium sized residential and commercial control applications. Three built-in COM ports, eight IR/Serial ports, eight I/O Versiports, eight isolated relays, and Ethernet provide for control of video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. Additional control ports may be added using Cresnet expansion modules, or by "slaving" additional control processors such as the CP2.

CP2E features include:

  • 2-Series engine | Dual-bus architecture
  • Cresnet port - master/slave selectable
  • 10/100 Ethernet | SSL encryption
  • e-Control 2 and RoomView enabled | SNMP support
  • 3 Com ports (RS-232/422/485)
  • 8 IR/serial ports
  • 8 Versiport I/O ports
  • 8 Low-voltage relay ports
  • Single-space EIA rack-mountable
Processor
  CPU 32-bit Freescale ColdFire® Microprocessor
Memory
  SDRAM 32 MB
  NVRAM 256 KB
  Flash 4 MB
Operating System
  Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+®
Ethernet
  10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications
Connectors
  COM A - C (3) DB9 male, bidirectional RS-232/422/485 ports;
Up to 115.2k baud;
Hardware and software handshaking support;
All ports support C2N-NPA8 Network Poll Accelerator
  INFRARED-SERIAL OUTPUT A - H (8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Individual signal generator per port, allowing simultaneous firing of all ports
  I/O Versiports 1 - 8 (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin
  RELAY OUTPUT 1 - 8 (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
  LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
  COMPUTER (1) DB9 female, RS-232 computer console port
  NET (1) 4-pin 5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8 Network Poll Accelerator
  24VDC (1) 2.1mm barrel DC power jack, 24 Volt DC power input;
(PW-2420RU power supply sold separately);
Passes through to NET port to power Cresnet devices
Reset Buttons
  HW-R Hardware reset (reboots the control system)
  SW-R Software reset (restarts the SIMPL program)
LED Indicators
  PWR (1 green) Indicates DC power supplied to unit
  NET (1 yellow) Indicates Cresnet bus activity
  MSG (1 red) Indicates control system has generated an error message
  LNK (1 red) Indicates a valid connection on LAN port
  ACT (1 red) Indicates activity on LAN port
Power Requirements
  24 Watts (1 Amp) @ 24 Volts DC (PW-2420RU power supply sold separately)
  Available Cresnet Power 26 Watts using PW-2420RU (sold separately)
  Cresnet Power Usage 24 Watts (1 Amp @ 24 Volts DC) with no power supply connected to the 24VDC connector
Environmental
  Temperature 41° to 113°F (5° to 45°C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  Chassis Steel, black matte powder coat finish
  Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay
  Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
  Height 1.80 in (4.57 cm);
1.70 in (4.32 cm) without feet
  Width 17.03 in (43.24 cm);
19.0 in (48.26 cm) with ears
  Depth 6.66 in (16.91 cm)
Weight
  3.54 lbs (1.59 kg)


facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.