Call Now: 1-800-284-2288 |
(discontinued)Dual Current Sensor Module |
|
|
This product has been discontinued. For an alternative, please contact [email protected]
The ST-CS is a Cresnet® expansion module that provides power sensing of two individual devices such as televisions, AV receivers, and many other AC powered device. A typical application for current sensing is to provide confirmation of the device's power on/off state. This is often necessary to enable reliable power control for IR controlled devices that do not include discrete power commands in their IR control protocol. The ST-CS may be used to provide a current sensing interface wherever required for loads up to 1000 Watts, and may be rack-mounted using the optional ST-RMK rack mount kit (sold separately). Communication with the control system is via a single Cresnet connection.
Available Configurations Include:
STI-CS | Dual-Channel Current Sensor Module - International Version, 230V. Includes PWI-1215 Power Supply. |
ST-PC | Dual Power Control Module, 120VAC. Includes PW-1205 Power Supply. |
STI-PC | Dual Power Control Module - International Version, 230V. Includes PWI-1215 Power Supply. |
Connectors | ||
POWER A – B | (2) 3-prong grounded AC sockets; Sensed AC power outlets; Maximum Total Load: 10 Amps (1000 Watts) at 120 Volts AC; Minimum Sensing Load: 0.033 Amps (4 Watts) at 120 Volts AC; Voltage Range: 90 to 125 Volts AC @ 50-60Hz |
|
POWER IN | (1) 6 ft (1.83m) cable with grounded AC plug; Connects to AC power source |
|
NET | (2) 6-pin RJ11 female, Cresnet slave ports, paralleled; Connect to Cresnet control network |
|
12VDC | (1) 2.5mm barrel DC power jack; 12 Volt DC power input (PW-1205 power pack included) |
|
Controls & Indicators | ||
PWR | (1) green LED, indicates power supplied from Cresnet network or local power pack | |
NET | (1) amber LED, indicates communication with Cresnet system | |
FULL, POWER A – B | (2) recessed trim pots and red LEDs, adjust “full load” threshold for corresponding outlet | |
PARTIAL, POWER A – B | (2) recessed trim pots and amber LEDs, adjust “partial load” threshold for corresponding outlet | |
Power Requirements | ||
Power Pack | 0.5 Amp @ 12 Volts DC; 120 Volts AC, 60 Hz power pack, model PW-1205, included |
|
Cresnet Power Usage | 3 Watts (0.125 Amp @ 24 Volts DC) with no power pack connected | |
Environmental | ||
Temperature | 41° to 113°F (5° to 45°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Enclosure | ||
Chassis | Metal, black finish | |
Faceplate | Extruded aluminum, black finish with polycarbonate label overlay | |
Mounting | Freestanding or 1U 1/2-width 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit sold separately) | |
Dimensions | ||
Height | 1.80 in (46 mm); 1.70 in (44 mm) without feet |
|
Width | 7.07 in (180 mm) | |
Depth | 6.32 in (161 mm) | |
Weight | ||
2.72 lb (1.24 kg) | ||
INTERNATIONAL VERSION (230 VAC) | ||
STI-CS | ||
All the features and specifications of the ST-CS except: | ||
Connectors (partial) | ||
POWER A – B | (2) 6 ft (1.83m) cables with inline female IEC connector, sensed AC power outlets; Maximum Total Load: 6 Amps, 1000 Watts at 220 Volts AC; Voltage Range: 90 to 220 Volts AC @ 50-60Hz |
|
Power Requirements | ||
Power Pack | 0.5 Amp @ 12 Volts DC; 230 Volts AC, 50 Hz power pack, model PWI-1215, included |
|
Cresnet Power Usage | 3 Watts (0.125 Amp @ 24 Volts DC) with no power pack connected | |
Weight | ||
2.92 lb (1.33 kg) |
st-cs.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|