cen-erfgw-poe.jpg View Larger Image (in new window)

Crestron : CEN-ERFGW-POE

By: Crestron
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
Extended Range RF Wireless Gateway

The CEN-ERFGW-POE gateway is a 2-way RF transceiver that enables wireless communication and management for up to 16 Crestron® "Extended Range" wireless touch screens and remotes. It is compatible with the TST-600 and TPS-6X Wireless Touch Screens and UFO-WPR-3ER Waterproof Wireless Remote.[1] A single wire links the CEN-ERFGW-POE to a Crestron control system via Cresnet® or high-speed Ethernet with PoE.


Available Configurations Include:

CEN-ERFGW-POE-PWE Extended Range RF Wireless Gateway w/PoE Injector, includes PWE-4803RU
CEN-RFGW-EX infiNET EX® Wireless Gateway
CEN-RFGW-EX-PWE infiNET EX® Wireless Gateway w/PoE Injector, includes PWE-4803RU
CLW-EXPEX-GD-W-T infiNET EX® Wireless Expander, Ground Pin Down, White Textured

CEN-ERFGW-POE features include:

  • 2-way "Extended Range" RF wireless transceiver/gateway
  • Supports up to 16 touch screens and remotes
  • Dynamic discovery for fast, easy setup
  • "Wi-Fi friendly" channel selection
  • Built-in RF network diagnostics
  • 100 to 200 feet range indoors, 1000 feet outdoors
  • Supports roaming for extended coverage[2]
  • Antenna extendable using optional ANT-EXT
  • Crestron Toolbox™ software configuration and management
  • Cresnet® or Ethernet control system interface
  • Single-wire Cresnet or PoE network powered
  • Compatible with TST-600, TPS-6X, and UFO-WPR-3ER[1]
  RF Transceiver 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), IEEE 802.15.4 compliant
  Transmitting Power 170.2 mW (Ch.11), 110.7 mW (Ch.12-24), 23.4 mW (Ch.25), 0.6 mW (Ch.26) @ high setting; 3.2 mW (Ch.11-25), 0.6 mW (Ch.26) @ low setting
  Range (typical) 100 to 200 feet maximum indoor, 1000 feet outdoor, subject to site-specific conditions
  Roaming Supports roaming amongst up to 8 RF gateways[2]
  Maximum 16 "ER" wireless devices per gateway or roaming network
  Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3af and 802.3at Type 1 compliant
  Cresnet® Supports Cresnet slave mode
Controls & Indicators
  PWR (1) Green LED, indicates DC power supplied from Cresnet network or PoE
  NET (1) Yellow LED, indicates communication with the Cresnet system
  RXD (1) Red LED, indicates data is being received from wireless network devices
  TXD (1) Red LED, indicates data is being transmitted to wireless network devices
  ACQUIRE (1) Recessed pushbutton with red LED, used to set up connections with wireless devices
  SETUP (1) Recessed pushbutton with red LED, used to set up connection with the control system via Cresnet or Ethernet
  LAN (1) Green and (1) Amber LEDs, green indicates link status, amber indicates Ethernet activity
  Antenna (1) Connection for supplied antenna
  LAN PoE (1) 8-wire RJ45, female;
10Base-T/100Base-TX Ethernet port;
Power over Ethernet compliant
  NET (1) 4-pin 3.5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network
Power Requirements
  Power over Ethernet IEEE 802.3af (802.3at Type 1) Class 1 PoE Powered Device
  Cresnet Power Usage 3 Watts (0.13 Amps @ 24 Volts DC)
  Note: May be powered by PoE or Cresnet network power, not both.
  Construction Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
  Mounting Freestanding, surface mount, or attach to a single rack rail
  Temperature 41° to 104°F (5° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  (Without antenna)
  Height 6.41 in (163 mm)
  Width 3.91 in (100 mm)
  Depth 1.43 in (37 mm)
  13.6 oz (386 g)

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.