Wired Microphone For The MKH 800 Series

The Sennheiser MKH 800 TWIN is a universal studio condenser microphone of exceptional quality. It includes a dual capsule consisting of two symmetrical push-pull transducers with high linearity. This is a "side fire" microphone with the two cardioid pick-up patterns of the transducer aligned back-to-back across the axis of the microphone. The signals of both transducers are not combined in the microphone in order to generate differing pick-up patterns but are available separately as two channels at the microphone output. This allows the pick-up patterns of the MKH 800 TWIN to be remotely adjusted. The signals can be combined in any desired way in the mixing console in order to create all pick-up patterns from omni-directional to figure-8 with an infinite number of intermediate stages. Based on the legendary MKH 800, this microphone opens up to a new dimension of studio recordings.

→ The remote adjustability and the variable pick-up patterns make the MKH 800 TWIN a universal main microphone, soloist microphone or supporting microphone.
→ The pick-up patterns can be set and optimized under monitoring conditions. In other words, it is not necessary to fix the pick-up patterns definitively before recording.
→ A wide range of mixes for stereo and surround are possible (including in parallel).
→ Saving of the microphone signals in two channels also allows an unlimited range of mixes to be realized at a later date.
→ The high sensitivity ensures interference-free signal paths as a result of high signal levels. The inherent noise of downstream microphone amplifiers is thus of minor importance.
→ Very low inherent noise prevents the masking of filigree sound structures. The depth of the acoustic can be heard more clearly too.
→ High linearity of the transducers minimizes the signal distortions and ensures the transparency of the sound even at high sound levels.
→ The frequency response extends to 50 kHz, thus improving the resolution for complex acoustic details.
→ Stable pick-up patterns minimize sound distortion in the direct and diffuse field.
→ Negative acoustic effects caused by the housing and the sound inlet basket are minimized.
→ The small, slim design and the optionally dark housing design (Nextel) make it visually unobtrusive.

Current consumption	2 x 3.1 mA
Dimensions	d 27 mm, l 136 mm
Dynamic range	122 dB(A), 114 dB(CCIR)
Equivalent noise level	12 dB
Equivalent noise level	20
Frequency response (microphone)	30 - 50,000 Hz
Max. sound pressure level (passive)	134 dB
Min. terminating impedance	2 kΩ
Nominal impedance	100 Ω
Phantom powering	48V ± 4 V
Pick-up pattern	Variable
Sensitivity in free field, no load (1kHz)	40 mV/Pa (-28 dBV)
Weight	6.1 oz. (172 g)
Color	Nextel grey