stc-mcs241u3v.jpg View Larger Image (in new window)

Sentech : STC-MCS241U3V

By: Sentech
Industrial, USB, & Medical Cameras
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1/1.2" IMX 174, 2.3MP, 163fps, USB3 Vision, Color

The SenTech STC-MCS241U3V features 163 FPS, and a dazzling 2.35 MP resolution. Utilizing CMOS Global Shutter, the STC-MCS241U3V is capable of capturing moving objects without any motion blur. By utilizing the user friendly USB 3.0 interface, speed and power have never been easier to use. 

Scanning System



Shutter Type

Global Shutter

Scanning Mode

Full Scanning, Variable AOI (Horizontal & Vertical)

Maximum Frame Rate (Full Scanning Mode)

1920 x 1200: 163 fps (RAW8bit), 81.5 fps (RAW10bit), 81.5 (RAW12bit). * Frame rate will drop if connected to a USB 2.0 Port.

Maximum Frame Rate (AOI Mode)

1280 x 1024: 189 fps (RAW8bit), 94 fps (RAW10bit/RAW12bit), 640 x 480: 378 fps (RAW8bit), 189 fps (RAW10bit/RAW12bit)

Sync System


Video Output Format

RAW 8bit / 10bit / 12bit (Default Raw 8bit)

S/N Ratio

< 3 digit ( Gain 0 dB)

Electronic Shutter

Exposure Time: 18.6 usec to 20 sec (Full Scanning Mode, RAW8bit), 23.4 usec to 40 sec (Full Scanning Mode, RAW10bit/RAW12bit)



- Analog

0 ~ 24 dB

- Digital

0 ~ 6 dB

Offset (Analog)

RAW8bit: 0 to 31 digit, RAW12bit: 0 to 511 digit


ROI (Horizontal:32 to 1920 pixels / Vertical:32 to 1200 lines); (Default: 1920 x 1200) Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction



Decimation Function

Individual x2 Horizontal, Vertical Decimation (Frame rate increases with vertical decimation, but the frame rate does not increase with horizontal decimation)


AE, AGC (Default AE: OFF, AGC: OFF)

White Balance

Auto / Manual / One-shot (Default: Manual)

Mirror Image

Horizontal / Vertical / Horizontal and Vertical (Default: OFF)

Pixel Defect Correction

Up to 64 pixels (Default: ON)

Operational Mode

Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software Selectable)

User Setting Storage



USB 3.0 Super Speed (USB 3.0 Micro B)

Input / Output

Three GPIO, One Camera Hardware Reset





- Input Voltage

+5V (typ.) (Conform to USB Standard)

- Consumption

< 4.0 W


C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors

Lens Mount

C Mount

Optical Filter

IR cut filter

Optical Center Accuracy

Positional Accuracy in H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/- 1.5 deg.


Approx. 48g

Interface Connector

USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent



Operating Temperature


- Minimum

Environmental Temperature: 0°C

- Maximum

Camera housing temperature (top plate) shall not exceed 55°C

Storage Temperature

Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%


20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each


Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011


RoHS Compliant

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.