Search

Digital Hybrid UHF Belt Pack Transmitter

Lectrosonics - LECTROCSONICS LMA View Larger Image (in new window)

Lectrosonics : LECTROCSONICS LMA

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The LECTROCSONICS LMA combines an excellent feature set with superb performance in a classic Lectrosonics wireless belt-pack transmitter at a modest cost. 24-bit digital audio is combined with optimized FM to create unprecedented audio quality and RF performance. The RF transmission is an aggressively optimized FM system with /-75kHz wide deviation for a high audio signal to noise ratio and wide dynamic range. When matched with a Lectrosonics digital hybrid receiver, the system will deliver a full bandwidth, flat audio frequency response up to 20kHz with extremely low distortion. Compatibility with earlier analog Lectrosonics receivers and even some receiver models from other manufacturers is provided by firmware emulations built into the DSP code. A simple procedure using the frequency and power switches selects the desired operating mode.

LECTROCSONICS LMA features include:

  • Digital Hybrid Wireless® technology (US patent 7,225,135)
  • Multi-mode compatibility with Digital Hybrid and analog receivers
  • 256 synthesized frequencies
  • DSP based pilot-tone signal
  • DSP controlled, dual envelope input limiter
  • 5-pin input jack for mic and line level signals
  • Rugged machined aluminum construction
Type of Transmitter UHF Digital Hybrid Beltpack
# Of Channels 256 in 100kHz steps
Type of Input Connector Switchcraft TA5-male
Type of Microphone Not Included
Polar Pattern Not Applicable
Interchangeable Mic Heads Compatible with microphones, instrument and line cables features TA5-F connections
Frequency Response Microphone - 90Hz to 20kHz (+/- 1dB) with 70Hz roll-off filter
Instrument - 40Hz to 20kHz (+/- 1dB)
Battery Type/Approx. Life 9V Alkaline - 6 hours
9V LiPolymer - 7 hours
9V Lithium - 13 hours
Mute Switch On/Off Switch
Level Control Audio Gain Control - 43dB Range; semi-log rotary dial
Antenna Type Galvanized steel, flexible wire
Display -10dB / -20dB LED
Power LED
Dimensions (WxHxD) 3.1 x 2.4 x .75" (7.87 x 6.09 x 1.90cm)
Weight 6.3 oz (180g)


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.