Progressive Scan Cube Camera

• 1/1.8" UXGA Progressive Scan CCD

• Analog Output

• Triggering and Partial Scan

Model No

STC-A202A

Imager

1/1.8” Interline UXGA monochrome progressive CCD ICX274AL

Total Picture Element

1688 (H) x 1248 (V)

Effective Picture Element

1628 (H) x 1236 (V)

Active Picture Element

UXGA: 1620 (H) x 1220 (V)

Chip Size

8.5 (H) x 6.8 (V) mm

Cell Size

4.4 (H) x 4.4 (V) µm

Scanning System

Progressive

Scanning Method

Full scanning, Partial full scanning, 1/2 partial scanning, 1/4 partial scanning, variable partial scanning Binning, Binning partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanning, Binning variable partial scanning

Vertical Frequency (Frame Rate)

15.3164 Hz

Horizontal Frequency

19.176 kHz

Pixel Frequency

36.8181 MHz

S/N Ratio (Standard Deviation)

56 dB (GAIN 0 dB)

Minimum Scene Illumination

1 Lux at F1.4

Sync System

Internal / External

Video Output

1.0 Vp-p / 75 Ω, DC coupling (0V)

Shutter Speed

-

- Dip Switch

OFF, 1/200, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/20,000 second

- Communication

OFF, 1/2 to 1/100,000 sec. (Variable at every H and clock)

Gain

0 to 27 dB

Gamma

1.0 / 0.45

Power Supply

-

- Input Voltage

12 Vdc ± 10%

- Consumption

Less than 3.0 W

Trigger Mode

Edge Preset Trigger (V-Reset, Non-Reset) Pulse Width Trigger (V-Reset, Non-Reset)

Communication

RS232 via 12pin connector

Dimensions

28(H) x 28(W) x 46.3(D) mm (including the lens mount and connector)

Optical Filter

No IR cut filter

Optical Center Accuracy

Positional accuracy in H. and V. directions: +/- 0.31 mm

Material

-

- Case

Front, base, and rear: Aluminum die cast (ADC12) Cover: Steel sheet covered with zinc

- Tripod

Polycarbonate ABS

Lens Mount

C Mount

Interface Connector

HR10A-10R-12PB (Hirose) or equivalent

Tripod

The tripod can be attached to 4 plates (4 screws on the bottom plate, 3 screws on the remaining plates)

Weight

Approximately 52g (Camera 43g, Tripod 9g)

Temperature and Humidity

- Operational

Temperature: -5 to 45 deg. C; Relative Humidity: 0 to 85% (No condensation)

- Storage

Temperature: -30 to 65 deg. C; Relative Humidity: 0 to 90% (No condensation)

Vibration

20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 direction 30 min. each

Shock

Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI:EN55011 (Class B)

RoHS

RoHS Compliant