Search

Embossed Single-Diaphragm Microphone

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]
The Shure KSM Microphone Series KSM 32 is an embossed single-diaphragm, side-address, cardioid condenser microphone for highly critical studio recording and live sound productions. The Shure KSM-32 offers an extended frequency response for an open, natural sounding reproduction of the original sound source.
Class A, transformerless preamplifier circuitry eliminates cross-over distortion for improved linearity across the full frequency range
Embossed, high-compliance diaphragm provides extended low frequency response
Ultra-thin, 2.5 µm, gold-layered, low mass, Mylar ® diaphragm for excellent transient response
15 dB attenuation switch for handling extremely high sound pressure levels (SPL)
Switchable low-frequency filter provides greater flexibility to reduce background noise or to counteract proximity effect
Integrated three-stage pop protection grille reduces “pop” and other breath noise
Internal shock mount reduces transmission of handling noise
Cartridge Type Permanently-biased Condenser
Frequency Response 20 to 20,000 Hz
Directional Polar Pattern Cardioid
Output Impedance 150 ohms (actual)
Attenuation Switch 0 or -15 dB attentuation
Low Frequency reponse switch flat; -6 db/octave below 115 Hz; -18 dB/octave below 80 Hz
Phantom Power 48 Vdc ±4 Vdc positive pins 2 and 3
Current Drain 4.65 mA typical at 48 Vdc
Common Mode Rejection > 50 dB, 20 Hz to 20 kHz
Polarity Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight 55.9 mm (2.20 in.) maximum body diameter, 187 mm (7.37 in.) long (see Figure 6), 490 grams (17.3 oz.)
Sensitivity (typical, at 1000hz; 1 Pa = 94 dB SPL) -36 dBV/Pa (16 mV)
Self-noise (typical, equivalent SPL; A-weighted, IEC 651) 13 dB
Maximum SPL at 1000hz 2500 ohms load (attenuator on), 1500 ohms load (attenutator on) 139 (154) dB, 133 (148) dB
Output Clipping Level 2500 ohms load, 1000 ohms load 9 dBV; 3 dBV
Dynamic Range 2500 ohms load; 1000 ohms load 126 dB; 119 dB
Signal to Noise ratio 81 dB
Total Harmonic Distortion (THD), 2500 ohms load <0.08% for a 120 dB equivalent SPL input



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.