Search

8 Port Active UTP Video Hub 100 Feet To 6,000 Feet (RJ45 Jacks)

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]
The Nitek 8 or 16 port active video hubs VH 856M with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other Nitek UTP video equipment including, video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.

Multi-channel video receiver hubs provide excellent video quality through two video outputs per channel. Twisted pair installations are made with a choice of the standard screw terminal connections, or the modular jack connections featured on the M series. The VH-856M can be used on video runs up to 3,000 feet (900 meters) when used with passive transmitters, or distances of up to 6,000 feet (1,800 meters) with the Nitek TT560 active transmitter. These hubs provide superior immunity from noise and interference, even when run in common raceways with AC power.

Quality video over ordinary twisted pair cable
Built-in surge suppression
Built-in ground loop isolation
Dual BNC connector output
RJ45 jack connector input
Convenient access to DIP switches for accurate gain and loss control
High immunity to noise and interference
LEDs to indicate video detection
Highly compact, only one rack unit in height
Video can be run in the same cable with telephone, computer signals and power
Size 1 RU x 6.0"D
Power Requirements 24 VAC @ 450mA (Wall transformer provided with unit)
Video Input Balanced low voltage current loop
Video Output 1 Vpp composite video monochrome or color
Common Mode Rejection >70dB
Video Format RS170, NTSC, PAL, SECAM, CCIR (Color or B/W)
Twisted Pair Connection RJ45 jack connectors
Output Connection Dual BNC Connectors
Wire Size 26 to 12 AWG Unshielded Twisted Pair
Operating Frequency DC to 10 MHz
Recommended Transmission Distance Up to 3,000 feet (900 meters) w/passive baluns Up to 6,000 feet (1,800 meters) w/active transmitters
Transient Immunity Built-in
Temperature Range -20 degrees C to 55 degrees C
Humidity Range 0 to 98% non-condensing
Enclosure Type Standard 19" rack 1 RU in height
Shipping Weight 8 lbs
Wire Spec 26 to 12 AWG Unshielded Twisted Pair (UTP)
DC Loop Resistance 51 Ohms/1,000 feet (max) (51 Ohms/300 meters)
Normal Capacitance: 17pF/ft.
Impedance 100 Ohms /- 20%
UTP Category 2 or better



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.