Search

Unshielded Twisted Pair (UTP) Transmission Up To 3,000 Feet (900 Meters)

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The Nitek Unshielded Twisted Pair TR560x4 modular card is designed for use with the modular rack system. The system holds up to ten (10) modular cards, in any combination, using the RK400 card cage (not included). This modular plug-in feature allows the system to be custom configured for each application and provides easy expandability.

The TR560x4 is designed for operation over category 2, 3, 4 or 5 twisted pair cable. The system works equally well over existing communication and computer network spare pairs or new cable installations. A highly balanced transmitter output design assures that the system will not interfere with other equipment on the network. Advanced receiver electronics provide complete immunity from ground loop, hum and noise to produce maximum video quality with minimum loss.

A DIP switch on the receiver unit provides incremental adjustment of gain and frequency compensation to allow the system to be fine-tuned for an existing cable. This unique feature provides adjustment for optimum performance over the entire operating range and also allows cable length to be estimated with a wide safety margin. The TR560x4 includes only the receiver card.
 

TR560X4 features include:

  • Active electronics compensate for frequency and level loss
  • Built-in protection from power surge, transients, static or other electrical interference
  • High resolution color or monochrome video
  • Complete immunity to ground loop; video and AC can be run in a common raceway, where code allows
  • Video detect LEDs for each receiver
  • RJ45 or push terminals for easy connection
Size 1 card slot
Power Requirements Card powered by modular rack
Input (4) Balenced low voltage current loop
Output (4) 1vpp composite video monochrome or color
Common Mode Rejection >70dB
Transient Immunity Built-in
Shipping Weight 1 lbs.
Wire Spec 26 to 12 AWG Unshielded Twisted Pair (UTP)
DC Loop Resistance 51 Ohms/1,000 feet (max) (51 Ohms/300 meters)
Normal Capacitance 17pF/ft.
Impedance 100 Ohms /- 20%
UTP Category 2 or better

 



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.