Search

(discontinued)1/3" Monochrome Progressive Scan Camera With 17mm Remote Head

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

This product has been discontinued. For an alternative solution, please contact sales.

The CM-030GE-RH is a monochrome progressive scan camera with 0.3 million pixels and standard GigE Vision / GenICam compliant digital interface. The CCD sensor is positioned in a remote head with 2 meter long cable.
The small size of the camera head (17mm) and the 2-meter length of its remote head cable make the CM 030GE-RH camera suitable for space- or weight-critical machine vision applications, such as robotics, surface mounting (PCB pick and place), semiconductor inspection, surface inspection, and more.

The CM030GE-RH camera is based on Sony's ICX424 CCD (656 x 494 active pixels) and outputs 120 full frames/second in continuous (free-run) mode. Higher frame rates (up to 504 frames/second) can be achieved by using the partial scan modes or vertical binning mode.

CM-030GE-RH camera also features a "sequence trigger" mode which enables users to pre-define multi-trigger repeating sequences where gain, shutter, and/or region of interest (ROI) is instantly changed as each new trigger in the sequence is received.
 

→ 1/3" monochrome progressive scan camera with Φ 17mm remote head
→ Member of C3 Compact series, covering VGA to UXGA resolution
→ 656 (h) x 494 (v) 7.4 μm square pixels
→ 120 frames/second with external trigger and full resolution
→ Increased frame rate with vertical binning and partial scan
→ Exposure time from 32.48 μs to 2 sec. using Pulse Width control
→ Programmable exposure from 32.48 μs to 8.299 ms in Full Frame scan
→ Sequencer trigger mode for on-the-fly change of gain, exposure and ROI
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ GigE Vision interface with 10 or 8-bit output
→ Programmable GPIO with opto-isolated inputs and outputs
→ Comprehensive JAI SDK & Control Tool for Windows XP/Vista/Windows 7
→ Indicators on rear panel Power / Hardware trigger, GigE link, GigE activity

Sensor 1/3" monochrome progressive scan CCD
Pixel Clock 58 MHz
Frame rate full frame 120 frames/second (511 lines/frame)
Active area 4.9 (h) x 3.7 (v) mm
Cell size 7.4 (h) x 7.4 (v) μm
Active pixels 656 (h) x 494 (v)
Read-out modes, Full 656 (h) x 494 (v) 120.4 fps
Read-out modes, 2/3 partial scan 656 (h) x 328 (v) 172.9 fps
Read-out modes, 1/2 partial scan 656 (h) x 246 (v) 216.8 fps
Read-out modes, 1/4 partial scan 656 (h) x 122 (v) 349.8 fps
Read-out modes, 1/8 partial scan 656 (h) x 60 (v) 504.7 fps
Read-out modes, Vertical binning 656 (h) x 247 (v) 193.8 fps
Read-out modes, Region-of-interest (ROI) User definable. Memory read-out
Sensitivity 0.41 Lux (On sensor, max. gain, shutter off, 50% video)
S/N ratio >50dB (0 dB gain)
Video output GigE Vision, 8-bit or 10-bit
Gain Manual -3 to 12 dB
Synchronization Internal X-tal, External hardware trigger via GPIO; Software trigger via GigE Vision
GPIO Module, Input/output switch Configurable 14-in/9-out switch (LUT)
GPIO Module, Clock generator (one) 12-bit counter based on 25MHz clock or Pixel Clock
GPIO Module, Pulse generators (four) 20-bit counters programmable for length,start point, stop point, repeat
Hardware trigger modes Continuous, Pre-Select, Pulse Width, Frame Delay, Reset Continuous, Sequence (Gain, Shutter, ROI)
Electronic shutter, Pre-set shutter 1/120 to 1/30,000 in 9 steps
Electronic shutter, Programmable exposure 2L (32.48μs) to 511L (8.299ms) in 1L steps
Electronic shutter, Exposure Time (Abs) Same range as PE
Electronic shutter, Pulse Width 2L to 24o frames (32.48μs to 2 seconds)
GPIO plus Pulse Width Register based, GigE Vision (GenICam compliant)
Functions controlled via GigE Vision interface Shutter, Gain, Black level, Trigger mode, Readout mode, GPIO setup, ROI (GenICam mandatory functions)
GigE Vision streaming control Packet size, Delayed (frame) Readout, Inter-packet delay
Operating Temperature -5°C to 45°C
Humidity (operation) 20 - 90% non-condensing
Storage temp./humidity -25°C to 60°C / 20 to 90% non-condensing
Vibration 10 G (20Hz to 200 Hz XYZ)
Shock 70G
Regulations CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
Power 12V DC /-10%. 3.6 W
Lens mount phi17mm exclusive mount
Dimensions (H x W x L) 29 x 44 x 75 mm (ccu)
Weight 130 g 120g (head with 2m cable)

 



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.