Search

1/2" High Resolution Interline Transfer CCD Color Camera

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The JAI TMC-775 provides users with a 1/2" format color interlaced camera with excellent sensitivity and a wide range of advanced features. The Sony ICX428AKL CCD imager offers superior light gathering ability due to its advanced μlens technology.

An integrated lens controller enables users to remotely operate the TMC 775 motorized lenses, pan & tilt heads, or any 3 external control channels. The single 15-pin connector is used for power, camera control, and video output, making installation clean and simple. All camera features are controllable via RS-232 commands over this single interface cable.

Designed with small size and ruggedness in mind, the TMC775 camera is suitable for a wide range of industrial, aerospace, and homeland security applications. Advanced options include Auto Level Control (ALC) to automatically adjust gain and shutter settings during changing light conditions; conformal coating; pixel blemish compensation; and extended temperature capability for operating in temperatures from -40 degrees C to 65 degrees C.
 

→ Color 1/2" high resolution interline transfer CCD
→ 768 x 494 resolution @ 30 fps (NTSC)
→ Micro size, rugged construction
→ Shutter from 1/60 to 1/100,000 sec.
→ RS-232 communications allows camera configuration for adjustable manual gain, ALC (optional), shutter, gamma and AWB select
→ External sync input
→ Mount positionable on all four sides
→ Single 15 D-sub connector for video, RS-232 & power
→ Mirror Image-Horizontal, enable/disable capability
→ 3-axis control for lens control or pan/tilt

Sensor 1/2" interlace CCD ICX428AKL
Active pixels 768 (H) x 494 (V)
Chip size 7.4 mm x 5.95
Cell size 8.4 μm x 9.8 μm
Scanning 525 lines / 60 Hz
Synchronization Internal/external auto switch, HD/VD 4.0 Vp-p impedance 10K ohm, VD = interlace/non-interlace, HD = 15.73 kHz ± 50ppm
TV resolution 570 (H) x 350 (V)
S/N ratio >50 dB min. (AGC Off)
Sensitivity 0.25 lux (f=1.4), max gain 50% video
Video output 1.0 Vp-p composite video, 75 ohm
ALC OP1-5 ON/OFF (RS-232 controlled)
Gamma 0.45 / 1.0 (RS-232 controlled) 1.0 Factory Default
Lens mount C-mount (adjustable)
Power requirement 12V DC, 175 mA typical at 25° C
Operating temperature Standard -10° C to 50° C
Operating temperature OP22-5-1 -40° C to 65° C (reduced performance may occur)
Storage temperature -50° C to 70° C
Vibration 7 Grms (20 Hz to 2000 Hz) Random
Shock 70 G, 11 ms, half-sine
Dimensions (H x W x L) 32 x 42 x 48.48 mm with mechanical enclosure, 29.3 x 39.4 x 35.66 without mechanical enclosure
Weight 113 g with mechanical enclosure, 69.9 g without mechanical enclosure.

 



facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.