p3000rl.jpg View Larger Image (in new window)

Electro Voice : P3000RL

By: Electro Voice
Pro-audio Products
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
1800 W Per Channel Remote Control Amplifier
The Electro-Voice P-3000RL is a flagship, with 2 x 1300 watts into 4 ohms and 2 x 1800 watts into 2 ohms, the digital controlled version of the legendary P3000 amplifier. The P 3000RL Loudspeaker outputs on Neutrik Speakon® NL4 connectors.

Built for the toughest tours and high-profile installations, Precision series remote control amplifiers deliver superb concert sound in a rugged package that stands up to the rigors of the road. High-power Class-AB designs drive your boxes as hard as you need to get full, clear coverage. Ultra-low distortion keeps your sound clean even at peak volumes with heavy loads. And road-ready design features—dual power supplies, multiple fans, and complete electronic protection circuitry—keep the show going while safeguarding both your investment and your reputation.

Long a staple of top touring companies, Precision series amplifiers are better than ever with the inclusion of the RCM-24 module, which brings P series amps under IRISNet control with state-of-the-art DSP technology. Offering system supervision, signal routing, advanced FIR-Drive loudspeaker optimization, IIR filters, level control, and dynamics, Precision series remote control amplifiers set the standard for professional concert sound.

High-power performance and control, installed or on tour
1800 W per channel (2 Ω)
Class-AB design
IRIS-Net enabled for remote control, monitoring, and DSP processing via included RCM-24 module
Eight recallable DSP/configuration presets
System check button for fast, complete test of all connected cables and loudspeaker components
Two GPI and two GPO ports
Parallel RJ-45 CAN bus connectors
Pilot tone detection for cable supervision
Amplifier Gain 34 dB
Connector Type Speakon NL4
Continuous Rated Power (1 kHz, THD 1%) 2Ω 1800 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1300 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 850 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1200 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 750 Watts
Control Protocol CAN-Bus
Controls 2 x 0 V, 5V free configurable, Easy-Remote
Cooling Front-to-rear, three 4-stage fans
DIM 30 0.01 %
Electronics Type Amplifier
FIR-Drive No
Frequency Response 20 - 20,000 Hz -1 dB
Impedance 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ XLR Input
Input Sensitivity 1.55 V 6dBu
Intermodulation Distortion (SMPTE) 0 %
Maximum Bridged Output 4Ω 3600 Watts
Maximum Bridged Output 8Ω 2600 Watts
Maximum Input Voltage 8.7V 21 dBu
Network Control (IRIS-Net) Yes
Serial Interface Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
Signal-to-Noise Ratio (A-weighted) 109 dB
Topology Class-AB
Total Harmonic Distortion 0.05 %
Height 3RU 132.5 mm (5.22")
Width 483 mm (19.02")
Depth 390 mm (15.35")
Weight Net 30 kg (66.14 lbs)

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.