Contact us for lowest price (800) 284-2288, (858) 565-1101, firstname.lastname@example.org
, or fax (858) 300-4193
16 Channel Powered VPD Combiner-Passive Transceiver Hub
The Vigitron Video, Power and Data UTP Transmission
Vi-1516VPD is a passive transceiver device that also combines video, PTZ data and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 16 cameras for up to 750 feet (228 m) and is designed to be installed at the control room.
The Vi 1516VPD has a built-in 16 channel fully isolated class II 28/24 VAC power supply. Each camera power output is equipped with a 2 A glass fuse accessible from front panel for extra protection. At the camera end the Vi1053VPD video balun/combiner provides video, power and data on separate outputs.
The video connections are through 16 BNC connectors and to the DVR or matrix switches. The data connections to the DVR are through 4-pair RJ-45 cables. There is a separate data connection for each camera. All equipment follows industry-standard EIA/TIA 568B pinouts. The Vi1516VPD is an ideal CCTV component for a structured cabling environments.
→ Video Format NTSC, PAL, SECAM→ Frequency 20 Hz to 10 MHz→ CMRR 60 dB→ Supports up to 16 cameras by providing video, class II power, and data on a single Cat-5 cable per camera for up to 750 feet (230m) → Built-in passive transceivers with surge protection → 16 isolated camera power individually selectable 24 or 28 VAC at 1 A max per channel, 6 A aggregated → A glass fuse per channel, accessible from front panel → Use with the Vi1053VPD transceiver at the camera → Power present and fault indicator LEDs for each camera → 60 dB cross talk and noise suppression on video signals → 1U high wall or rack mountable → Designed for structured wiring applications → Limited lifetime warranty → Security and surveillance applications → Department store and casino security applications → Schools, hospitals, airports applications → Structured wiring applications applications
| Input Voltage|| 110 VAC or 220 VAC, externally switch selectable |
| Input Current|| 4.8 Amps (110 VAC) / 2.4 Amps (220 VAC) |
| Camera Power Voltage|| Isolated class II, switch selectable 24 VAC, off or 28 VAC |
| Current|| 1 A maximum per camera, 12 A maximum aggregated |
| Total power|| 340 VA |
| Fault Protection|| 2 A glass fuse (front access) per camera |
| Twisted Pair (UTP)|| 100 Ohms /- 20%, 24 AWG minimum, Category 2-7 |
| Diagnostics LEDs|| No load or shut down: 16 red LEDs, one per channel |
| Power present|| 16 green LEDs, one per channel |
| Connectors|| Camera connection: RJ-45 connector |
| Data|| RJ-45 connector |
| Control room video|| BNCs |
| Transient Immunity|| per ANSI 587 C62.41 |
| Humidity|| 0 to 95%, non-condensing |
| Temperature Operating|| -20°C to 50°C |
| Storage|| -30°C to 70°C |
| Minimum Airflow|| 5 cft./min |
| Heat|| 1300 BTU/hour |
| Dimensions|| 1.75x17x12 in., 4.3x43x30.5 cm (HxWxL) |
| Weight|| 22 lb, 10kg |
| Material|| Steel sheet metal |
| Included Accessories|| Mounting brackets for front, rear or wall installations; Rubber feet for desk applications; 16 2-ft. (60cm) coax jumper cables, Moulded IEC 7-ft. (200 cm) power cord |
© 1996 - 2016 | All Rights Reserved
Audio Video Supply Inc.
4575 Ruffner St
San Diego, CA 92111
Prices and specifications subject to change without notice.