Video/Power transmission Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
Active Video Receiver

The NVT Video Active Receiver NV-652R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1 mile (1,6km) using Category 2 or better Unshielded Twisted-Pair (UTP) telephone wire.

The unparalleled interference rejection and low emissions of the Model NV-652R allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying “hum-bars” when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated. The built-in sharpness and brightness controls compensate for cable loss.

NV-652R features include:

→ One floating power supply may power multiple NV-652R receivers
→ Up to ten NV-652Rs can be mounted to an NV-RM 8/10 Rackmount Pane
→ Full-motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver; 1 mile (1,6km) when used with NV-653T transmitter
→ Exceptional interference rejection
→ Frequency Response DC to 10 MHz
→ Built-in transient protection and ground lifting
→ Built-in brightness and sharpness controls; blue power LED, green active LED
→ Compatible with qualified UTP cameras
→ Up to ten NV-652Rs may be rack mounted using the NV-RM8/10 rack panel kit
→ Best choice for DVR and high resolution applications over 750ft (225m)
→ Limited lifetime warranty

Video Frequency response DC to 10 MHz
Video Equalization 0.5 dB typ
Video Automatic (no adjustment) 0 to 3000ft (0 to 1km) for NTSC or PAL standards Automatic polarity detection and control Impedance
Video Common-mode / Differential-mode rejection 15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC 75 ohms
Video Impedance UTP, Screw terminal block or RJ45 100 ohms
LED Indicator Blue “Power-On”; Green “Active” signal present
Network Wiring One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0,5-1,31mm)
Wire Category Type 2 or better
Wire Impedance 100 ± 20 ohms
Wire DC Loop Resistance 52 ohms per 1,000ft (18 ohms per 100m)
Wire Differential Capacitance 19 pF/ft max (62 pF/m max)
Power 12-24VAC / DC (transformer not included) 100 mA max
Ambient temperature 32 to 122 °F (0 to 50 °C)
Humidity (non-condensing) 0 to 95%
Transient Immunity per ANSI / IEEE 587 C62.41
Dimensions, excluding brackets and connectors 3.00 x 1.54 x 1.10in (76 x 39 x 28mm)
Packaged weight 4.0oz (100g)
Material Black ABS
Mounting Two 0.175 in (4,4mm) diameter holes 2.5in (63,5mm) apart


facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.