Search

32-Channel StubEQ Active Receiver Hub

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

Employing NVT's latest generation StubEQ™ technology, the NVT 32 Channel StubEQ Active Receiver Hub NV-3242 is a 32-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 2,000ft (600m) using Category 2 or better unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, ground loops, and voltage transients, independent of video signal content.

The NV-3242unparalleled interference rejection and low emissions allow long run video to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. this allows the use of shared or existing cable plant. Ground-lifting ensures no annoying “hum-bars” when ground-potential differences exist. With built-in transient protection, damaging voltage spikes are eliminated.
 

NV-3242 features include:

→ External 12VDC 1 Amp regulated power module with IEC380-8 inlet and molded power cord (included)
→ Adaptive StubEQ fully automatic 2-band equalization provides adjustment-free equalization every time
→ Compact rack-mountable 19" 1U high enclosure features 32 channels
→ Full motion CCTV video at distances up to 1,500ft (460km) when used with any passive NVT transceiver or hub; 2,000ft (600m) when used with the NV-653T active transmitter
→ RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
→ Exceptional interference rejection
→ Built-in transient protection and ground-lifting
→ Compatible with qualified UTP cameras
→ Includes rack mount hardware and eight NV-RJ45A adaptors
→ Limited lifetime warranty

Video Frequency response DC to 10 MHz
Video Equalization 0.5 dB typ
Video Automatic (no adjustment) 0 to 1,250ft (0 to 380km) for NTSC or PAL standards
Video Common-mode / Differential-mode rejection 15 KHz to 5 MHz 60 dB typ
Video Impedance Coax, female BNC 75 ohms
Video Impedance UTP, Screw terminal block or RJ45 100 ohms
Wire Unshielded Twisted Pair 0 to 1,500ft 24-16 AWG (0,5-1,31mm)
Wire Category Type 2 or better
Wire Impedance 100 ± 20 ohms
Wire DC Loop Resistance 52 ohms per 1,000ft (18 ohms per 100m)
Wire Differential Capacitance 19 pF/ft max (62 pF/m max)
LED Power Blue=OK Red=Faul
Voltage 115 / 230VAC
Current 125mA / 60mA
Wattage 15 Watts 50 BTU/Hour
Frequencey 50 / 60 Hz
Temperature 32 to 122 °F (0 to 50 °C)
Minimum airflow 4 ft3/min (0,1m3/min)
Humidity (non-condensing) 0 to 95%
Transient Immunity per ANSI / IEEE 587 C62.41
Dimensions, excluding brackets and connectors 17in wide, 1.7in high, 1.875in deep, 43cm wide, 4,5cm high, 4,8cm deep
Packaged weight 3.0lbs (1,36kg)
Mounting Rack mount “L” brackets for front, rear, or wall installations; rubber feet for desk applications
NV-RJ45A Eight NV-RJ45A RJ45 to-screw-terminal

 

nv-3242.pdfDatasheet


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.