By: Vigitron
Innovative Video Transmission Solutions
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
8-Channel Powered VPD Combiner
The Vigitron Video, Power and Data UTP Transmission Vi 1408VPDD is an advanced device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 8 cameras and is designed to be placed at a location between the cameras and control room to extend the video up to 3,000 feet (915 m).

The Vi-1408VPDD has 8 channel fully isolated class II built-in 28/24 VAC power supply. Each camera power output is equipped with a glass fuse in addition to a resettable fuse for extra protection. All fuses are easily accessible from front. At the camera end the Vi1053VPD video balun/combiner provides video, power and data on separate outputs.

The Vi-1408-VPDD can be installed at the "head end" or “mid-span”. The video signals are connected through 4 RJ45 and Category-5 cables to passive or active UTP receivers at the control room. The data connections to the DVR are through 4-pair RJ-45 cables. There is a separate data connection for each camera. All equipment follows industry-standard EIA/TIA 568B pinouts. The Vi1408VPD is an ideal CCTV component for structured cabling environments.

Input Voltage 110 VAC or 220 VAC, externally switch selectable
Input Current 2.4 Amps (110 VAC) / 1.2 Amps (220 VAC)
Camera Power Voltage Isolated class II, switch selectable 24 VAC, off or 28 VAC
Current 1 A maximum per camera, 6 A maximum aggregated
Total power 170 VA
Fault Protection 2 A glass fuse (front access) per camera
Twisted Pair (UTP) 100 Ohms /- 20%, 24 AWG minimum, Category 2-7
Diagnostics LEDs No load or shut down: 8 red LEDs, one per channel
Power present 8 green LEDs, one per channel
Connectors Camera connection: RJ-45 connector
Data RJ-45 connector
Control room video RJ-45 connector
Transient Immunity per ANSI 587 C62.41
Humidity 0 to 95%, non-condensing
Temperature Operating -20°C to 50°C
Storage -30°C to 70°C
Minimum Airflow 3 cft./min
Heat 700 BTU/hour
Dimensions 1.75x17x12 in., 4.3x43x30.5 cm (HxWxL)
Weight 12 lb, 5.5 kg
Material Steel sheet metal
Included Accessories Mounting brackets for front, rear or wall installations; Rubber feet for desk applications; Moulded IEC 7-ft. (200 cm) power cord

facebook.png twitter.png googleplus.png linkedin.png youtube.png pinterest.png
Prices and specifications subject to change without notice.