Contact us for lowest price (800) 284-2288, (858) 565-1101, firstname.lastname@example.org
, or fax (858) 300-4193
8 Channel Powered VPD Combiner-Passive Transceiver Hub
The Vigitron Video, Power and Data UTP Transmission
Vi-1508VPD is a passive transceiver device that also combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 8 cameras for up to 750 feet (228 m) and is designed to be installed in the control room.
The Vi 1508VPD has a built-in 8 channel fully isolated class II 28/24 VAC power supply. Each camera power output is equipped with a 2 A glass fuse accessible from front panel for extra protection. At the camera end the Vi1053VPD video balun/combiner provides video, power and data on separate outputs.
The video connections are through 8 BNC connectors and to the DVR or matrix switch. The data connections to the DVR are through 4-pair RJ-45 cables. There is a separate data connection for each camera. All equipment follows industry-standard EIA/TIA 568B pinouts. The Vi1508VPD is an ideal CCTV component for structured cabling environment.
→ Supports up to 8 cameras by providing video, class II power, and data on a single Cat-5 cable per camera for up to 750 feet (230m) → Built-in passive transceivers with surge protection → 8 isolated camera power individually selectable 24 or 28 VAC at 1 A max per channel, 6 A aggregated → A glass fuse per channel, accessible from front panel → Use with the Vi1053VPD transceiver at the camera → Power present and fault indicator LEDs for each camera → 60 dB cross talk and noise suppression on video signals → 1U high wall or rack mountable → Designed for structured wiring applications → Limited lifetime warranty → Security and surveillance applications → Department store and casino security applications → Schools, hospitals, airports applications → Structured wiring applications applications
| Input Voltage|| 110 VAC or 220 VAC, externally switch selectable |
| Input Current|| 3 Amps (110 VAC) / 1.5 Amps (220 VAC) |
| Camera Power Voltage|| Isolated class II, switch selectable 24 VAC, off or 28 VAC |
| Current|| 1 A maximum per camera, 6 A maximum aggregated |
| Total power|| 170 VA |
| Fault Protection|| 2 A glass fuse (front access) per camera |
| Twisted Pair (UTP)|| 100 Ohms /- 20%, 24 AWG minimum, Category 2-7 |
| Diagnostics LEDs|| No load or shut down: 8 red LEDs, one per channel |
| Power present|| 8 green LEDs, one per channel |
| Connectors|| Camera connection: RJ-45 connector |
| Data|| RJ-45 connector |
| Control room video|| BNCs |
| Transient Immunity|| per ANSI 587 C62.41 |
| Humidity|| 0 to 95%, non-condensing |
| Temperature Operating|| -20°C to 50°C |
| Storage|| -30°C to 70°C |
| Minimum Airflow|| 3 cft./min |
| Heat|| 750 BTU/hour |
| Dimensions|| 1.75x17x12 in., 4.3x43x30.5 cm (HxWxL) |
| Weight|| 12 lb, 5.5 kg |
| Material|| Steel sheet metal |
| Included Accessories|| Mounting brackets for front, rear or wall installations; Rubber feet for desk applications; 8 2-ft. (60cm) coax jumper cables, Moulded IEC 7-ft. (200 cm) power cord |
© 1996 - 2016 | All Rights Reserved
Audio Video Supply Inc.
4575 Ruffner St
San Diego, CA 92111
Prices and specifications subject to change without notice.