By: Cantronic
Infrared Imaging & Commercial Vision Systems
Contact us for lowest price (800) 284-2288, (858) 565-1101,, or fax (858) 300-4193
The IA-126 uses a QWIP 640x512 IRFPA detector operating in the long infrared wavelength region (LWIR). IA 126 cameras are normally used with a Windows 2000 or XP PC for control, image display and other advanced features through a command and data link. However the IA126 can also be integrated into an users own system. The IA126 can be controlled with a basic control/configuration software, and can also run optional advanced RTS 1000 thermography software featuring live display and real-time storage.

With control software, you can configure the camera's frame size and rate, integrating time, NUC & PR (bad pixels replacement), gain and offset control. Also the image captured by the camera can be displayed and stored on PC through RS232 link and/or CamLink.

RTS1000 is a very useful software to generate live display and real time storage with real time board. The software has many functions for display, analysis and store images captured by the IA126 camera.

Image can be directed to the PC VGA screen or to a CCIR/RS170 video monitor (such as a LCD monitor). When using the VGA display mode, the image is presented on a window under the RTS1000 program (optional). Real time tools such as spot, profiles, histograms etc. are available on the live image. The video image is compatible with either CCIR 50 Hz or RS170 60 Hz.

The nominal aperture is F/2 or F/4. The average optical transmission is > 90% on the full wavelength.
Sensor QWIP
Resolution 640 x 512 pixels with random window in mode
Pitch 25 μm
Wavelength 7.8 - 9.2 μm ( nominal 8-10 μm )
Image Mode Snap shot
Cooling/MTBF Stirling cooler /7,500 hours
Full Frame Rate Programmable standard 1 to 60 Hz up to 100 Hz with high frame option
Integration Time Programmable(from 3 μs to 20ms ; Typ. 1.7ms/min. step: 1μs)
A/D Conversion 14 bits
NETD 25 mK at 25°C
F Number Standard F/2 or F/4 ( Optional )
System Control From a remote computer, Windows 2000 and XP
Video Output CCIR or RS 170 1 Vpp to 75 ohms, digital video
NUC Table 3 tables full frame
AGC Algorithms 3 tables full frame
Size w/o Lens 245mm(L) x 115mm(W) x 150mm(H)
Weight w/o Lens 2 KG
Power Supply 24VDC, 30W, external power adapter supplied
Operating Temperature -20°C to 50°C
Storage Temperature -20°C to 70°C
Vibration 10 g during 6 ms in case of shock, 3 g RMS between 1 Hz at 500 Hz in random vibration, 2 g peak to peak between 1 Hz at 500 Hz in sine vibration
The following lenses are available F=25 mm, F=50 mm, F=100 mm, F=200 mm, F= 250 mm, 50 / 250 mm bifocal, Customized lenses (including zoom lenses) are available upon special request.
Below are some of RTS1000 software's features1. Live image display
2. Digital Range and Level setup
3. Real time storage
4. Spot measurements
5. Profiles
6. Regions of interest
7. Temporal profiles
8. Color palettes
9. Image conversion to several image format
10. ASCII data generation
11. Radiometric calibration functions
12. Focal plane array calibration and characterization

Standard Accessories1. Power supply module 80-240 VAC 50-60 Hz input, 24 V DC output
2. Rugged transport case
3. Remote control Software
4. User manual (CD-ROM Electronic Format)
5. 50 mm LWIR manual focusing lens
6. 200 mm LWIR manual focusing lens
7. High Temperature Filter (High Pass 9.0μm, 1'' diameter)
8. Three (3) Neutral Density Filters (1'' diameter) 7-10μm 1%, 2%, and 10%
9. Standard Calibration from 5°C to 100°C without filter for 1 lens
10. Standard Calibration from 100°C to 1500°C with either high temp or neutral density filter for 1 lens and 1 set of filter
11. 15 m Digital Data Cable
12. 15 m Serial Communication Cable

facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.