0.33 Megapixel Black & White Mini Camera Link Industrial Camera

The Hitachi KPF30SCL is a Ultra Compact Cube Size Camera that has a 1/3" format Progressive Scan CCD with 500 TV Lines of Resolution and 60 frames per second.

The Hitachi KP F30SCL trigger and shutter can be used to capture an image at the desired timing and the accumulation time. The camera features Frame-on-Demand Mode, SCL or PCL CameraLink Output, - 10 or 8 bits per pixel and RoHS Compliant.

Imaging device	1/3-inch interline CCD
Total pixels	692(H) x 504(V)
Effective pixels	659(H) x 494(V)
Pixel size	7.4(H) x 7.4(V)μm
Sensing area	4.88(H) x 3.66(V)mm
Scanning system	Non-interlaced
Aspect ratio	4:3
Frame rate	60frames/second (full pixel readout)
Horizontal scanning frequency	31.468kHz
Vertical scanning frequency	60Hz
Sync system	Internal
Lens mount	C mount
Flange focal lens	17.526mm
Video output	Digital output: Camera Link; Data: Base configuration 10bit x 1; Clk = 24.5454MHz
VD reset	VD LVDS level, 59.94 Hz or less
Resolution	Horizontal: 500 TV lines; Vertical: 490 TV lines
Electronic shutter speed	1/60, 1/250, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 second; Factory setting is off(1/60 second) or changeable by variable shutter (Minimum 1/100000 second)
Gamma compensation	Ɣ= 1
Frame on demand	Remote setting (fixed shutter, one trigger and reset control mode) Factory setting is all off.
Power supply	12 ± 1V DC
Current consumption	Approx. 160mA (Approx. 1.5W)
Ambient, operating	0 to 40°C, ( 32 to 104°F), less than 90% RH
Ambient, storage	-10 to 50°C ( 14 to 122°F), less than 70% RH (Without Dew condensation)
Note	If operated continuously, be sure to use at less than 40°C(104°F) for long term stable performance
Vibration endurance	98 m/s2 (10 to 60Hz, amplitude: 0.98mm constant/60 to 200Hz, amplitude: variable) (10 TO 150Hz, sweep:1 min, XYZ, 30min)
Shock endurance	686 m/s2 (Drop test, once each top, bottom, left and right)
Dimensions	29(W) x 29(H) x 38.5(D)mm
Mass	Approx. 53g