Search

Composite Video, S-Video & Stereo Audio Over Twisted Pair Receiver With IR Repeater

Contact us for lowest price (800) 284-2288 , (858) 565-1101 Call Now [email protected]

The TP10 is a twisted pair receiver for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair signal and the TP-10 converts the twisted pair signal back into video & audio signals.
 

→ Level (Gain) & EQ (Peaking) Controls

→ Input 1 RJ-45 CAT 5 shielded connector (LINE IN)
→ Output 1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω [C] on a 4-pin connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector
→ Max. Output Level Video: 2.6V; Audio: 4.6Vpp
→ Bandwidth Video: >70MHz/-3dB; Audio: 20Hz to 20kHz/0.1dB
→ Non-Linearity <0.05%
→ Diff. Gain <0.05%
→ Diff. Phase 0.09Deg
→ S/N Ratio Video: >75dB/5MHz weighted; Audio: >73dB
→ Audio Conversion Sample Rate 48kHz
→ Audio Conversion Resolution 24-bits
→ Power Source 12V DC, 82mA
→ Dimensions 12cm x 6.95cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H
→ Weight 0.3kg (0.67lbs) approx
→ Options RK-3T 19" rack adapter
→ Audio S/PDIF or unbalanced analog
→ IR Repeater 1 IR sensor
→ Twisted Pair Input/Outputs RJ-45 connector
→ System Range up to 200m (650ft)
→ Cable UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5
→ Power Connect™ System Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other
→ Compact Kramer TOOLS™ 3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter

 

tp-10.pdfspec sheet


facebook.png twitter.png googleplus.png linkedin.png youtube.png
Prices and specifications subject to change without notice.