Ikegami IDE-10 Network Video Decoder

→ Description: Decoder
→ Video Input: Compressed Video
→ Video Output: VBS 1.0Vp-p 75ohms Unbalanced
→ Video Compression: H.264
→ Video Settings: Video set by IP Camera or IEN-10
→ Analog I/O: Monoral both ways = Line input - 10dBV 10kohm; Line Output - 10 dBV 600pohm
→ Audio Compression: ADPCM 32Kbps
→ Protocol: TCP, UDP, RTP/RTCP, RTSP,HTTP, FTP, DHCP, DNS, NTP
→ Monitoring: Ikegami Viewing Software
→ Network: Ethernet 10Base-T/100Base-T
→ Serial Control: RS-232C or RS-485
→ I/O Terminal: Input = Non-Voltage Contact, Output = Open Collector Max24V, 50mA
→ Power Requirements: AC24V +/-10% 50/60Hz, DC12V (10.5V ~ 15V), PoE (IEEE802.3af)
→ Power Consumption: Approx 4W
→ Operating Temperature: -10 to +50 Degree C
→ Operating Humidity: Within 30 to 85% RH
→ External Dimensions: 132(W) x 44(H) x 179(D) mm
→ Weight: Approx 880g
→ LAN: RJ-45 (Auto MDI/MDIX)
→ VBS IN/OUT: BNC
→ Audio IN/OUT: RCA L/R each 1
→ AC24V/DC12V: 2P Push In Terminal
→ DC12V: Jack for AC Adaptor
→ I/O Terminal: 4P Push In Terminal
→ RS-232C: 9P D-SUB (Male)
→ RS-485: 3P Push In Terminal
→ SD Card Memory Slot: Full Size
→ Standard Accessories: Operation Manual, Feet, AC Adaptor
→ H/264 Video Compression.
→ ADPCM 32Kbps Audio Compression.
→ AC24V/DC12V/PoE Power Requirements
→ VBS 1.0Vp-p can be input.
→ H.264 or JPEG Video Compression.
→ ADPCM 32Kbps Audio Compression.
→ Constant Bit Rate (CBR) or Variable Bit Rate (VBR).
→ Image Size/Frame Rate/Bit Rate can be optimized.
→ Privacy Mask Function.
→ Motion Detection Function (Indoor/Outdoor use)
→ SD Card Access to store the Video.
→ AC24V/DC12V/PoE Power Requirements.
→ Support for the Milestone XProtect Device.