JAI-Pulnix TM-1327GE 2/3" Mohochrome Progressive Scan CCD GigE Vision Camera, Non-RoHS With Lead Processing

→ 2/3" progressive scan IT CCD (ICX285AL/ICX285AQ)
→ 1392(H) x 1040(V) @ 30 fps
→ 6.45 μm square pixels
→ Compact 51 x 51 x 85 mm housing
→ High speed point-to-point connection, up to 1Gbps
→ GigE Vision output (8-bit/10-bit selectable)
→ Gigabit Ethernet output (8-bit/10-bit selectable)
→ Near IR sensitivity and high gain CCD output
→ Maximum dynamic range control through built-in look-up table (8-bit only)
→ User-definable variable partial scan
→ Full-frame shutter to 1/21,000 sec.
→ Asynchronous reset, no-delay shutter
→ High gain CCD output and near IR sensitivity
→ Extensive software developer's kit (SDK)
→ Sensor: 2/3" progressive scan interline transfer CCD
→ Active area: 8.98mm x 6.71mm
→ Active pixels: 1392 (H) x 1040 (V)
→ Cell size: 6.45 μm x 6.45 μm
→ Readout mode: 1392 (H) x 1040 (V) @ 30 Hz, User-definable partial scan
→ Synchronization: Internal/External auto switch, HD/VD, 4.0 Vp-p impedance 4.7K Ohm, VD= 30 Hz ± 5%, non-interlace, HD=31.59 kHz ± 5%
→ Pixel clock: 55.00 MHz
→ S/N ratio: >52 dB
→ Sensitivity, Mono: 0.4 lux f=1.4 (no shutter) @ 30 fps,
→ Video output: Gigabit Ethernet (8-bit/10-bit)
→ Gamma: Programmable LUT (Gamma 1.0 std)
→ Shutter speed: (programmable) 1/30 to 1/21,000 in increments of 31.65 μs
→ Lens mount: C-mount (use >2/3" format lenses)
→ Power: 12V DC ± 10%, 430 mA (typical at 25° C)
→ Operating temperture: -10° C to 50° C
→ Vibration: 7 Grms (10 Hz to 2000 Hz) Random
→ Shock: 70 G, 11 ms, half-sine
→ Dimensions: (H x W x L) 51 mm x 51 mm x 85 mm
→ Weight: 212 g (without tripod)