JAI-Pulnix TM-775NIR Monochrome Interlaced Scan 1/2" CCD Near Infrared (NIR) Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ 1/2" NIR high resolution interline transfer CCD
→ 768 x 494 resolution @ 30 fps (EIA)
→ Micro size, rugged construction
→ Shutter from 1/60 to 1/100,000 sec.
→ RS-232 adjustable manual gain, selectable ALC modes (optional), shutter, gamma and field/frame select
→ External sync in
→ Mount positionable on all four sides
→ Single 15 D-sub connector for video, RS-232 and power
→ Mirror Image, horizontal-enable/disable capability
→ 3-axis control for lens control or pan/tilt
→ High sensitivity option for low light applications
→ Sensor: 1/2" CCD NIR interlace ICX428AL
→ Active pixels: 768 (H) x 494 (V)
→ Chip size: 7.4 x 5.95 mm
→ Cell size: 8.4 μm x 9.8 μm
→ Scanning: 525 lines / 60 Hz
→ Synchronization: Internal/external auto switch, HD/VD 4.0 Vp-p impedance 10K ohm, VD = interlace/non-interlace, HD = 15.73 kHz ± 5%
→ TV resolution: 570 (H) x 350 (V)
→ S/N ratio: >53 dB min. (AGC Off)
→ Sensitivity: 0.10 lux (f=1.4)
→ High sensitivity option: Up to 100X increase in low-light sensitivity (reduced resolution)
→ Video output: 1.0 Vp-p composite video, 75 ohm
→ Gamma: 0.45 / 1.0 (RS-232 controlled) 1.0 Factory Default
→ Lens mount: C-mount (adjustable)
→ Power requirement: 12V DC, 150 mA typical at 25° C
→ Operating temperature: -10° C to +50° C
→ Storage temperature: -50° C to +70° C
→ Vibration: 7 Grms (20 Hz to 2000 Hz) Random
→ Shock: 70 G, 11 ms, half-sine
→ Dimensions: (H x W x L) 32 x 42 x 48.48 mm with mechanical enclosure, 29.3 x 39.4 x 35.66 mm without mechanical enclosure
→ Weight: 113 g with mechanical enclosure, 69 g without mechanical enclosure.
The JAI's TM-775NIR provides users with a 1/2" format interlaced camera with sensitivity equal to or greater than many 2/3" cameras. The Sony ICX428AL CCD imager offers superior light gathering ability due to its advanced micro lens technology and its extended sensitivity in the near-infrared (NIR) portion of the spectrum.
An integrated lens controller enables users to remotely operate the TM 775NIR motorized lenses, pan & tilt heads, or any 3 external control channels. The single 15-pin connector is used for power, camera control, and video output, making installation clean and simple. All camera features are controllable via RS-232 commands over this single interface cable.
Designed with small size and ruggedness in mind, the TM775NIR camera is suitable for a wide range of industrial, defense, and homeland security applications. Advanced options include Auto Level Control (ALC) to automatically adjust gain and shutter settings during changing light conditions; conformal coating; pixel blemish compensation; and extended temperature capability for operating in temperatures from -40 degrees C to +65 degrees C.
Similar Models:
TM-773NIR: Monochrome Interlaced Scan 1/3" CCD Near Infrared (NIR) Camera
