JAI-Pulnix TMC-4200GE 1.2" 4.2MP 2048X2048 Resolution Color Progressive Scan IT CCD Camera, GigE Vision Interface, Non-RoHS With Lead Processing
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ 2048 x 2048 resolution @ 15 fps dual-tap
→ 7.4 μm square pixels
→ Software-selectable single-tap mode available @ 8 fps
→ 12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)
→ GigE Vision Ethernet output and analog output
→ 100 m with standard CAT 5E or CAT 6 cable
→ Image center partial scan (1000, 500, 250 lines)
→ 2X2 binning and user-definable variable partial scan
→ Full-frame shutter to 1/16,000 sec.
→ Asynchronous reset, no-delay, pulse width control shutter
→ Defective pixel compensation
→ PIV (particle imaging velocimetry) mode
→ Extensive software developer's kit (SDK)
→ Sensor: 1.2" progressive scan interline transfer CCD
→ Active area: 15.15mm x 15.15mm
→ Active pixels: 2048 (H) x 2048 (V)
→ Cell size: 7.4 μm x 7.4 μm
→ Readout modes, A: 2048 (H) x 2048 (V) @ 15 Hz
→ Readout modes, B: 2048 (H) x 1000 (V) @ 28 Hz (partial scan)
→ Readout modes, C: 2048 (H) x 500 (V) @ 50 Hz (partial scan)
→ Readout modes, D: 2048 (H) x 250 (V) @ 80 Hz (partial scan)
→ Readout modes, U: User-definable partial scan
→ Synchronization Internal/External auto switch: HD/VD, 4.0 Vp-p impedance 4.7K Ohm; VD=14.79 Hz ± 2%, non-interlace; HD=30.78 kHz ± 2%
→ Pixel clock: 40.00 MHz
→ S/N ratio: > 58 dB
→ Sensitivity, Color: 0.8 lux f=1.4 (no shutter) @ 15 fps, Pixel sensitivity: 31 μV/e-
→ Video output, Analog: 1.0 Vp-p, 75 Ohm
→ Video output, Digital: Gigabit Ethernet (8-bit/10-bit/12-bit)
→ Color: (TMC/RMC-4200 only) Raw Bayer output for host-based interpolation
→ Gamma: Programmable LUT (Gamma 1.0 std)
→ Shutter speed: (programmable) 1/15 to 1/16,000 in increments of 32.5 μs
→ Lens mount: C, F, M42 mount (use >1" format lenses)
→ Power: 12V DC ± 10%, 590 mA (typical at 25° C)
→ Operating temperature: -10° C to 50° C
→ Vibration: 7 Grms (10 Hz to 2000 Hz) Random
→ Shock: 70 G, 11 ms, half-sine
→ Dimensions: (H x W x L) 51 mm x 51 mm x 85 mm
→ Weight: 214 g (without tripod)
The JAI's TMC-4200GE is a non-RoHS, with lead processing version of the RMC-4200GE camera.
The JAI's TMC-4200GE is a compact, very high-resolution (4.2 Megapixels) color progressive scan CCD camera with a dual-tap front-end, automatic channel balancing, GigE Vision digital output, and a frame rate of 15 fps at 2048 x 2048 resolution. A single-tap mode at 8 fps is user selectable. The TMC 4200GE features the latest Kodak KAI-4021 CCD imager equipped with a Bayer color filter array (host-based interpolation required).
The TMC4200GE provides 12-bit linear output, or can be set to generate 10-bit/8-bit images modifiable by a patent-pending, built-in look-up table (LUT). Other features include image center partial scanning (250, 500, or 1000 lines), user-definable variable partial scanning (any number of lines with any starting point), defective pixel compensation, and a PIV mode for advanced flow analysis.
The TMC-4200GE is supported by JAI's easy-to-use SDK and Control Tool software, offering straightforward setup and full GigE Vision and GenICam compliance. The camera also integrates smoothly with a variety of third-party GigE Vision software libraries and development tools.
A Camera Link version of the TMC-4200GE camera is also available: TMC-4200CL.
Similar Models:
RM-4200GE: 1.2" 4.2MP 2048X2048 Resolution Monochrome Progressive Scan IT CCD Camera, GigE Vision Interface
RMC-4200GE: 1.2" 4.2MP 2048X2048 Resolution Color Progressive Scan IT CCD Camera, GigE Vision Interface
