JAI AB-1600GE Color Progressive Scan CCD 16-Megapixel GigE Vision Camera

→ Member of C3 Advanced series
→ 4872 (h) x 3248 (v) 7.4 μm square pixels
→ 43.3 mm progressive scan IT CCD – Monochrome and Bayer mosaic color versions
→ 3 frames/second with full resolution in continuous operation
→ Increased frame rate with binning (AM-1600 GE) and partial scan
→ Edge-Pre-Select, Pulse Width and Frame Delay trigger modes
→ Sequence trigger mode for on-the-fly change of gain, exposure and ROI
→ Electronic shutter with programmable operation to 296 μs
→ Several pre-processing functions for offloading host PC such as: LUT for Gamma/Knee function; Pixel blemish compensation (AM-1600GE only); Shading compensation (AM-1600GE only); Test pattern generator function
→ Analog video output for auto-iris lens control
→ GigE Vision interface with 12, 10 or 8-bit output
→ Comprehensive software tools and SDK for Windows XP/Vista
→ Sensor: 43.3mm Bayer Color KAI-16000-CXA
→ Pixel clock: 30 MHz
→ Frame rate: full frame 3.04 frames/sec. (dual tap)
→ Active area: 36.1 mm (h) x 24.0 mm (v)
→ Cell size: 7.4 μm x 7.4 μm
→ Active pixels: 4872 (h) x 3248 (v)
→ Read-out modes, Full scan: 4872 (h) x 3248 (v) 3.04 fps
→ Read-out modes, 1/2 partial scan: 4872 (h) x 1372 (v) 5.51 fps
→ Read-out modes, 1/4 partial scan: 4872 (h) x 1028 (v) 9.25 fps
→ Read-out modes, Variable partial scan: Start line from 1 to 2448 by 1 line unit for AM-1600 GE, 2 line units for AB-1600 GE, height (lines) from 800 to 3248
→ Vertical binning mode: n/a
→ Sensitivity: 0.35 lux (Max. gain, Shutter OFF, 50% Green, w/IR cut filter)
→ S/N ratio: > 56 dB (Green, 0 dB gain)
→ Video output: GigE Vision Compliant, 8-bit, 10-bit, 10-bit packed, 12-bit, 12-bit packed
→ Video output: GigE Vision Compliant, Raw Bayer 8-bit, 10-bit or 12-bit
→ White balance: Manual/One push auto/Preset (3200K, 4600K, 5600K)
→ Gain: Manual/Automatic -3 to +12 dB
→ Gamma/Knee: Fixed 1.0, 0.45 or 256 point LUT
→ Synchronization: Internal X-tal
→ GPIO Module, Input/output switch: Configurable 16-in / 12-out switch
→ GPIO Module, Clock generators (One): 12-bit counter based on Pixel clock
→ GPIO Module, Pulse generators (Two): 19-bit counter programmable for length, start point, stop point, repeat
→ Hardware trigger modes: Edge Pre-Select, Pulse Width Control, Frame Delay and Sequence
→ Electronic Shutter, Programmable exposure: 3 (296μs) to 3327 L (328ms) in 1L steps
→ Electronic Shutter, Exposure Time (Abs): μsec - user definable. Same range as PE
→ Electronic Shutter, Exposure auto continuous: 100L to 3327L (1/101.35 sec to 1/3 sec)
→ Electronic Shutter, GPIO plus Pulse Width: max. 2 sec (Can be set by 100μs unit or Pixel Clock unit)
→ Pre-processing functions: Blemish compensation and shading compensation (AM-1600 GE only), Channel balance, programmable LUT, test pattern generator
→ Control interface: Register based. GigE Vision / GenICam compliant
→ Functions controlled via GigE Vision interface: Shutter, Gain, Black Level, Trigger mode, Read out mode, GPIO setup, ROI (GenICam mandatory functions)
→ GigE Vision Streaming Control: Packet size, Delayed (Frame) read-out, inter-packet delay Jumbo Frame max. 16020 bytes. Default packet size 1476 bytes.
→ Indicators on rear panel: Power/Hardware trigger, GigE Link, GigE activity
→ Operating temperature: -5°C to +45°C
→ Humidity: 20 – 80% non-condensing
→ Storage temp/humidity: -25°C to +60°C / 20% to 80% non-condensing
→ Vibration: 10G (20Hz to 200Hz, XYZ)
→ Shock: 70G
→ Regulatory: CE (RN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE
→ Power: 12V DC ± 10% 7.5 w (typical in continuous mode)
→ Lens mount: Universal P mount or Nikon F mount
→ Dimensions: (W x H x D) 55 x 55 x 120 mm (excluding surface projection)
→ Weight: 430 g