JAI BB-500GE 2/3" Bayer Mosaic Color Progressive Scan CCD GigE Vision Camera

→ 2/3" Bayer mosaic color progressive scan CCD
→ Member of C3 Basic series
→ 2456 (h) x 2058 (v) 3.45 micro m square pixels
→ 15 frames/second with full resolution in continuous operation
→ 15 frames/second with external trigger and full resolution
→ Sequencer trigger mode for on-the-fly change of gain, exposure and ROI
→ Edge Pre-Select and Pulse Width trigger modes
→ Exposure time from 64 micro s to 2 sec. using Pulse Width Control trigger mode
→ Programmable exposure from 64 micro s to 66 ms in Full Frame scan
→ Several pre-processing functions for offloading host PC
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto iris lens video output allows a wider range of light
→ Partial scan
→ Pre-processing functions inside the camera
→ GigE Vision interface with 12, 10 or 8-bit output
→ Programmable GPIO with opto-isolated inputs and outputs
→ Comprehensive software tools and SDK for Windows XP/Vista
→ Sensor: 2/3" progressive scan CCD
→ Pixel Clock: 60 MHz
→ Frame rate full frame: 15 frames/second
→ Active area: 8.45 (h) x 7.10 (v)
→ Cell size: 3.45 (h) x 3.45 (v)
→ Active pixels: 2456 (h) x 2058 (v)
→ Color: Raw Bayer output, host based interpolation
→ Read-out modes, Full: 2456 (h) x 2058 (v) 15 fps
→ Read-out modes, 1/2 partial scan: 2456 (h) x 1028 (v) 24 fps
→ Read-out modes, 1/4 partial scan: 2456 (h) x 514 (v) 34 fps
→ Read-out modes, 1/8 partial scan: 2456 (h) x 258 (v) 43 fps
→ Read-out modes, 2/3 partial scan: 2456 (h) x 1372 (v) 20 fps
→ Read-out modes, Region-of-interest (ROI): User definable. Memory read-out
→ Sensitivity: (BB-500 GE) 1.0 Lux (On sensor, max. gain, shutter off, 50% video)
→ S/N ratio: >50 dB (0 dB gain)
→ Video output: GigE Vision, 8-bit, 10-bit or 12-bit
→ Auto-iris lens video output: 0.7 Vp-p, enabled by internal switch
→ Gain: Manual/Automatic, Range -3 to 12 dB
→ Synchronization Internal X-tal, External hardware trigger via GPIO; Software trigger via GigE Vision
→ GPIO Module, Input/output switch: Configurable 16-in / 12-out switch
→ GPIO Module, Clock generator (one): 12-bit counter based on Pixel clock
→ GPIO Module, Pulse generators (four): 20-bit counter programmable for length, start point, stop point, repeat
→ Trigger modes: Pre-Select, Pulse Width, Frame Delay and Sequence
→ Electronic shutter, Pre-set shutter: 1/15 and 1/30 to 1/10,000 in 10 steps
→ Electronic shutter, Programmable exposure (PE): 2L(64 micro s) to 2072 L (66.44ms) in 1L steps
→ Electronic shutter, Exposure Time (Abs): micro sec – user definable. Same range as PE
→ Electronic shutter, Pulse Width: 64 micro s to 2 sec.
→ Pre-processing functions: Output transfer functions (Gamma, multiple-point knee),Bayer white balance, L/R channel balancing, Blemish compensation
→ Control interface: Register based. GigE Vision/GenICam compliant
→ Functions controlled via GigE Vision interface: Shutter, Gain, Black Level, Trigger mode, Read-out mode, GPIO setup, ROI (GenICam mandatory functions)
→ GigE Vision streaming control: Packet size (1428 to 4036 bytes), Delayed (Frame) read-out, inter-packet delay
→ Indicators on rear panel: Power/Hardware trigger, GigE Link, GigE activity
→ Operating Temperature: -5°C to 45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to 60°C / 20 to 90%
→ Vibration: 10G (20Hz to 200 Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC /-10%. 5.8W
→ Lens mount: C-mount
→ Dimensions (H x W x L): 55 x 55 x 55
→ Weight: 210 g