JAI CM-030GE 1/3" Monochrome Progressive Scan GigE Vision Camera

→ 1/3" monochrome progressive scan camera
→ Member of C3 Compact series, covering VGA to UXGA resolution
→ 656 (h) x 494 (v) 7.4 micro m square pixels
→ 90 frames/second with external trigger and full resolution
→ Increased frame rate with vertical binning (CM-030 GE) and partial scan
→ Exposure time from 21.6 micro s to 2 sec. using Pulse Width trigger mode
→ Programmable exposure from 43.2 micro s to 11.037 ms in Full Frame scan
→ Sequencer trigger mode for on-the-fly change of gain, exposure and ROI
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto iris lens video output allows a wider range of light
→ GigE Vision interface with 10 or 8-bit output
→ Partial scan and vertical binning
→ Unique sequencer function
→ Programmable GPIO with opto-isolated inputs and outputs
→ Comprehensive software tools and SDK for Windows XP/Vista
→ Sensor: 1/3" progressive scan CCD
→ Pixel Clock: 40 MHz
→ Frame rate full frame: 90.5 frames/second (511 lines/frame)
→ Active area: 4.9 (h) x 3.7 (v) mm
→ Cell size: 7.4 (h) x 7.4 (v) micro m
→ Active pixels: 656 (h) x 494 (v)
→ Read-out modes, Full: 656 (h) x 494 (v) 90.5 fps
→ Read-out modes, 1/2 partial scan: 656 (h) x 246 (v) 159 fps
→ Read-out modes, 1/4 partial scan: 656 (h) x 122 (v) 255 fps
→ Read-out modes, 1/8 partial scan: 656 (h) x 62 (v) 361 fps
→ Read-out modes, 2/3 partial scan: 656 (h) x 326 (v) 128
→ Read-out modes, Vertical binning: (CM-030 GE only) 656 (h) x 247 (v) 166.2 fps
→ Read-out modes, Region-of-interest (ROI): User definable. Memory read-out
→ Sensitivity: (CM-030GE) 0,05 Lux Lux (On sensor, max. gain, shutter off, 50% video)
→ S/N ratio: >50dB (0 dB gain)
→ Video output: GigE Vision, 8-bit or 10-bit
→ Auto-iris lens video output: 0.7 Vp-p, enabled by internal switch
→ Gain: Manual -3 to +24 dB
→ Synchronization Internal X-tal, External hardware trigger via GPIO Software trigger via GigE Vision
→ GPIO Module, Input/output switch: Configurable 14-in/9-out switch (LUT)
→ GPIO Module, Clock generator (one): 12-bit counter based on 25MHz clock or Pixel Clock
→ GPIO Module, Pulse generators (four): 20-bit counters programmable for length, start point, stop point, repeat
→ Hardware trigger modes: Continuous, Pre-Select, Pulse Width, Frame Delay, Sequence (Gain, Shutter, ROI)
→ Electronic shutter, Pre-set shutter: 1/90 to 1/10,000 in 9 steps
→ Electronic shutter, Programmable exposure: 2L (43.2 micro s) to 511L (11.037ms) in 1L steps
→ Electronic shutter, Exposure Time (Abs): Same range as PE
→ Electronic shutter, Pulse Width: max. 2 sec (Can be set by 100 micro s unit or Pixel Clock unit)
→ GPIO plus Pulse Width: Register based GigE Vision (GenICam compliant)
→ Functions controlled via GigE Vision interface: Shutter, Gain, Black level, Trigger mode, Readout mode, GPIO setup, ROI (GenICam mandatory functions)
→ GigE Vision streaming control: Packet size, Delayed (frame) Readout, Inter-packet delay
→ Indicators on rear panel: Power/Hardware trigger, GigE link, GigE activity
→ Operating Temperature: -5°C to +45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to +60°C / 20 to 90%
→ Vibration: 10 G (20Hz to 200 Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC +/-10%. 3.6 W
→ Lens mount C-mount
→ Dimensions (H x W x L): 29 x 44 x 75 mm
→ Weight: 125 g