
JAI CM-030PMCL-RH 1/3" Monochrome Progressive Scan CCD 0.3 MP Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ C3 Compact series 1/3" progressive scan camera
→ Monochrome Remote head Camera with a 2 m cable
→ 659 (h) x 494 (v) active pixels
→ 7.4 μm square pixels
→ 120 frames/second with external trigger and full resolution
→ Increased frame rate with vertical binning and partial scan (Up to 504 fps)
→ Exposure time from 32.48μs to 2 sec. using Pulse Width Control
→ Programmable exposure from 32.48μs to 8.299 ms by 1 LVAL (16.24μs) increments
→ Pre-select, Pulse width and Pre-select with Smear Less trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ PoCL (Power over CL) standard compliant
→ 10 or 8-bit output
→ Mini-CL interface
→ Setup by Windows NT/2000/XP via serial communication
→ Sensor: 1/3" progressive scan CCD
→ Pixel clock: 58 MHz
→ Frame rate full frame: 120 frames/second(511 lines/frame)
→ Active area: 6.4 (h) x 4.8 (v)
→ Cell size: 7.4 (h) x 7.4 (v)
→ Active pixels: 659 (h) x 494 (v)
→ Read-out modes, Full: 659 (h) x 494 (v) 120.491 fps.
→ Read-out modes, 1/2 partial scan: 659 (h) x 246 (v) 216.80 fps.
→ Read-out modes, 1/4 partial scan: 659 (h) x 122 (v) 349.83 fps.
→ Read-out modes, 1/8 partial scan: 659 (h) x 60 (v) 504.72 fps.
→ Read-out modes, 2/3 partial scan: 659 (h) x 328 (v) 172.95 fps.
→ Read-out modes, Vertical binning: 659 (h) x 247 (v) 193.88 fps.
→ Read-out modes, Region-of-interest (ROI): 659 (h) x 494 (v) 120.491 fps.
→ Sensitivity: 0.3 Lux (On sensor, max gain, shutter off, 50% video)
→ S/N ratio: >50dB (0 dB gain)
→ Video output: Camera Link, 8-bit or 10-bit
→ Auto iris lens video output: 0.7 Vp-p
→ Gain: Manual/Automatic Range -3 to 24 dB
→ Synchronization: Int. X-tal or ext. trigger
→ Inputs, Camera Link: Ext. trigger, LVDS (CC 1)
→ Inputs, TTL: Ext. trigger 4V ±2V
→ Outputs, Camera Link: Clk., FVAL, LVAL, Data, EEN
→ Outputs, TTL: XEEN
→ Trigger modes: Pre-select, Pulse Width, and Pre-select
→ Electronic shutter, Pre-set shutter: 1/120 to 1/30,000 in 9 steps
→ Electronic shutter, Programmable exposure (PE): 2L (32.48μs) to 511L (8.299ms)
→ Electronic shutter, Pulse Width: 32.48μs to 2 sec.
→ Control interface: Mini-CL serial communication
→ Functions controlled via serial communication: Shutter, Trigger mode, Readout mode,Trigger Polarity, Black level, Gain
→ Indicators on rear panel: LED for power and trigger input
→ Operating temperature: -5°C to +45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to +60°C/20% to 90%
→ Vibration: 10G (20Hz to 200Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC +/-10%. <0.3A
→ Lens mount: f 17mm Exclusive mount
→ Dimensions: (H x W x L) Head f17 x 46mm ( f x D ) with 2m cable; CCU 44 x 29 x 66 mm (H x W x D)
→ Weight: Head with 2m cable 120g, CCU 120g
→ Monochrome Remote head Camera with a 2 m cable
→ 659 (h) x 494 (v) active pixels
→ 7.4 μm square pixels
→ 120 frames/second with external trigger and full resolution
→ Increased frame rate with vertical binning and partial scan (Up to 504 fps)
→ Exposure time from 32.48μs to 2 sec. using Pulse Width Control
→ Programmable exposure from 32.48μs to 8.299 ms by 1 LVAL (16.24μs) increments
→ Pre-select, Pulse width and Pre-select with Smear Less trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ PoCL (Power over CL) standard compliant
→ 10 or 8-bit output
→ Mini-CL interface
→ Setup by Windows NT/2000/XP via serial communication
→ Sensor: 1/3" progressive scan CCD
→ Pixel clock: 58 MHz
→ Frame rate full frame: 120 frames/second(511 lines/frame)
→ Active area: 6.4 (h) x 4.8 (v)
→ Cell size: 7.4 (h) x 7.4 (v)
→ Active pixels: 659 (h) x 494 (v)
→ Read-out modes, Full: 659 (h) x 494 (v) 120.491 fps.
→ Read-out modes, 1/2 partial scan: 659 (h) x 246 (v) 216.80 fps.
→ Read-out modes, 1/4 partial scan: 659 (h) x 122 (v) 349.83 fps.
→ Read-out modes, 1/8 partial scan: 659 (h) x 60 (v) 504.72 fps.
→ Read-out modes, 2/3 partial scan: 659 (h) x 328 (v) 172.95 fps.
→ Read-out modes, Vertical binning: 659 (h) x 247 (v) 193.88 fps.
→ Read-out modes, Region-of-interest (ROI): 659 (h) x 494 (v) 120.491 fps.
→ Sensitivity: 0.3 Lux (On sensor, max gain, shutter off, 50% video)
→ S/N ratio: >50dB (0 dB gain)
→ Video output: Camera Link, 8-bit or 10-bit
→ Auto iris lens video output: 0.7 Vp-p
→ Gain: Manual/Automatic Range -3 to 24 dB
→ Synchronization: Int. X-tal or ext. trigger
→ Inputs, Camera Link: Ext. trigger, LVDS (CC 1)
→ Inputs, TTL: Ext. trigger 4V ±2V
→ Outputs, Camera Link: Clk., FVAL, LVAL, Data, EEN
→ Outputs, TTL: XEEN
→ Trigger modes: Pre-select, Pulse Width, and Pre-select
→ Electronic shutter, Pre-set shutter: 1/120 to 1/30,000 in 9 steps
→ Electronic shutter, Programmable exposure (PE): 2L (32.48μs) to 511L (8.299ms)
→ Electronic shutter, Pulse Width: 32.48μs to 2 sec.
→ Control interface: Mini-CL serial communication
→ Functions controlled via serial communication: Shutter, Trigger mode, Readout mode,Trigger Polarity, Black level, Gain
→ Indicators on rear panel: LED for power and trigger input
→ Operating temperature: -5°C to +45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to +60°C/20% to 90%
→ Vibration: 10G (20Hz to 200Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC +/-10%. <0.3A
→ Lens mount: f 17mm Exclusive mount
→ Dimensions: (H x W x L) Head f17 x 46mm ( f x D ) with 2m cable; CCU 44 x 29 x 66 mm (H x W x D)
→ Weight: Head with 2m cable 120g, CCU 120g
The CM-030PMCL-RH is a remote head (2m cable), monochrome progressive scan camera with 0.3 million pixels resolution with Mini-CL interface and Power over CL (PoCL).
The CM 030PMCL-RH camera utilizes the Sony ICX424 CCD and outputs 120 full frames/second in continuous (free-run) mode. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.
For proper and safe operation, the PoCL cameras require a compatible frame grabber. The CM030PMCL-RH camera complies with the "Safe Mode" feature stipulated by the PoCL standard.










