
JAI CM-040MCL 1/2" Monochrome Progressive Scan Camera With Mini Camera Link Interface
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Compact series 1/2" progressive scan camera
→ 776 (h) x 582 (v) active pixels
→ 8.3 micro m square pixels
→ 61.15 frames/second with full resolution in continuous operation
→ 60 frames/second with external trigger and full resolution
→ Up to 280 frames/second with partial scan
→ 111 frames/second with vertical binning (CM-040 MCL only)
→ Shutter speed from 27.437 micro s to 2 sec. using Pulse Width Control
→ Programmable exposure from 54.874 micro s to 16.553 ms
→ Pre-select and Pulse width trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto iris lens video output to support dynamic lighting conditions
→ 10 or 8-bit output
→ Mini Camera Link interface
→ Auto iris lens video output to support dynamic lighting conditions
→ Setup by Windows NT/2000/XP via serial communication
→ Right angle adapter (optional)
→ Sensor: 1/2" progressive scan CCD
→ Pixel Clock: 33.75 MHz
→ Frame rate full frame: 61.15 frames/second (596 lines per frame)
→ Active area: 6.49 (h) x 4.83 (v) mm
→ Cell size: 8.3 x 8.3 micro m
→ Active pixels: 776 (h) x 582 (v)
→ Read-out modes, Full: 776 (h) x 582 (v) 61 fps
→ Read-out modes, 2/3 partial scan: 776 (h) x 390(v) 87 fps
→ Read-out modes, 1/2 partial scan: 776 (h) x 294 (v) 110 fps
→ Read-out modes, 1/4 partial scan: 776 (h) x 146 (v) 186 fps
→ Read-out modes, 1/8 partial scan: 776 (h) x 74 (v) 280 fps
→ Read-out modes, Vertical binning: 776 (h) x 291 (v) 111 fps**NOTE: CM-040 MCL only
→ Sensitivity: (CM-040 MCL) 0.2 Lux (On sensor, Max. gain, shutter off, 50% video)
→ S/N ratio: >50dB (0 dB gain)
→ Video output: 8 or 10 bit in Mini-CL
→ Auto-iris lens video: 0.7 Vp-p
→ Gain: Manual, -3dB to +24dB
→ Synchronization: Int. X-tal or ext. trigger
→ Inputs, Camera Link: Ext. trigger, LVDS (CC 1)
→ Inputs, TTL: Ext. trigger 4V ±2V
→ Outputs, Camera Link: Clk., FVAL, LVAL, Data, EEN
→ Outputs, TTL: XEEN
→ Trigger modes: Pre-select, Pulse Width
→ Electronic shutter, Pre-set shutter: 1/60 to 1/10,000 in 10 steps
→ Electronic shutter, Programmable exposure: 2L (54.87 micro s) to 596L (16.353ms) in 1L steps
→ Electronic shutter, Pulse Width Control: 27.437 micro s to 2 sec.
→ Accumulation: Auto-detect LVAL-synchr. / asynchr.
→ Control interface: Mini-CL serial communication
→ Functions controlled by serial communication: Shutter, Trigger mode, Readout mode, Trigger Polarity, Black level, Gain, Indicators on rear panel: LED for power and trigger input
→ Operating Temperature: -5°C to +45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to +60°C / 20 to 90%
→ Vibration: 10G (20Hz to 200 Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC ±10% 3 W
→ Lens mount: C-mount
→ Dimensions: (H x W x L) 29 x 44 x 66 mm (CM/CB-040 MCL)
→ Weight: 115 g (CM/CB-040 MCL)
The CM-040MCL is a ½" monochrome progressive scan camera with 776 (h) x 582 (v) active pixels and Mini Camera Link interface.
The CM 040MCL camera utilizes the Sony ICX415 CCD and outputs 61 frames/second with full resolution. Higher frame rates can be achieved by using the partial scan or vertical binning modes.
An auto iris lens video output function is also available to support dynamic lighting conditions.
The CM040MCL is available with a factory-installed Right Angle Adapter. The adapter enables the camera to "look" at a 90° angle and is designed for a range of inspection tasks where physical access on production lines is limited.
Similar Models:
CB-040MCL: 1/2" Bayer Mosaic Color Progressive Scan Camera With Mini Camera Link Interface










