JAI CM-140MCL-UV 1/2" Monochrome Progressive Scan UV-Sensitive CCD 1.4 MP Camera

→ C3 Compact series 1/2" progressive scan camera
→ Monochrome UV-sensitive CCD
→ 1392 (h) x 1040 (v) active pixels
→ 4.65 μm square pixels
→ 16 frames/second with full resolution in continuous operation
→ 16 frames/second with external trigger and full resolution
→ Up to 38 frames/second with partial scan
→ 25 frames/second with vertical binning
→ Shutter speed from 59μs to 2 sec. using Pulse Width Control
→ Programmable exposure from 118μs to 62 ms
→ Pre-select and Pulse width trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Mini-CL interface
→ Power over CL (PoCL) version available
→ Auto iris lens video output allows a wider range of light
→ 10 or 8-bit output
→ Setup by Windows NT/2000/XP via serial communication
→ Sensor: 1/2" progressive scan CCD
→ Pixel Clock: 33.75 MHz
→ Frame rate full frame: 16.14 frames/second (1052 lines per frame)
→ Active area: 6.4 (h) x 4.8 (v) mm
→ Cell size: 4.65 x 4.65 μm
→ Active pixels: 1392 (h) x 1040 (v)
→ Read-out modes, Full: 1392 (h) x 1040 (v) 16.14 fps
→ 2/3 partial scan: 1392 (h) x 694 (v) 20.76 fps
→ 1/2 partial scan: 1392 (h) x 520 (v) 24.16 fps
→ 1/4 partial scan: 1392 (h) x 269 (v) 32.16 fps
→ 1/8 partial scan: 1392 (h) x 130 (v) 38.41 fps
→ Vertical binning: 1392 (h) x 527 (v) 25.37 fps
→ Sensitivity: 0.3 Lux (On sensor, Max. gain, shutter off, 50% video)
→ S/N ratio: >50dB (0 dB gain)
→ Video output: 8 or 10 bit in Mini-CL
→ Auto-iris lens: video 0.7 Vpp
→ Gain: Manual, -3dB to +12dB
→ Synchronization: Int. X-tal or ext. trigger
→ Inputs, Camera Link: Ext. trigger, LVDS (CC 1)
→ Inputs, TTL: Ext. trigger 4V ±2V
→ Outputs, Camera Link: Clk., FVAL, LVAL, Data, EEN
→ Outputs, TTL: XEEN
→ Trigger modes: Pre-select, Pulse Width, Reset Continuous
→ Electronic shutter, Pre-set shutter: 1/30 to 1/10,000 in 9 steps
→ Electronic shutter, Programmable exposure: 2L (118μs) to 1052L (62ms) in 1L steps
→ Electronic shutter, Pulse Width Control: 59μs to 2 sec.
→ Accumulation: Auto-detect LVAL-synchr. / asynchr.
→ Control interface: Mini-CL serial communication
→ Functions controlled by serial communication: Shutter, Trigger, Screening, Readout mode, Trigger Polarity, Black level, Gain
→ Indicators on rear panel: LED for power and trigger input
→ Operating Temperature: -5°C to +45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to +60°C / 20 to 90% non-condensing
→ Vibration: 10G (20Hz to 200 Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC ±10% 1.8 W
→ Lens mount: C-mount
→ Dimensions: (H x W x L) 29 x 44 x 66 mm
→ Weight: 120 g