JAI CM-200PMCL 1/1.8" Monochrome Progressive Scan 2MP Camera

→ Compact series 1/1.8" monohrome progressive scan camera
→ Power over Camera Link (PoCL)
→ 1620 (h) x 1236 (v) pixels active area
→ 4.4 micro m square pixels
→ 25 frames/second with full resolution in continuous operation
→ Up to 24 frames/second with external trigger and full resolution
→ Up to 89 frames/second with partial scan
→ 48 frames/second with vertical binning
→ Shutter speed from 32 micro s to 2 sec. using Pulse Width Control
→ Programmable exposure from 64 micro s to 40 ms
→ Pre-select and Pulse width trigger modes
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Auto-iris lens video output allows a wider range of light
→ 10 or 8-bit output
→ Mini-CL interface
→ Setup by Windows NT/2000/XP via serial communication
→ Sensor: 1/1.8" progressive scan CCD
→ Pixel Clock: 65 MHz
→ Frame rate full frame: 24.98 frames/sec.(1251 lines per frame)
→ Active area: 7.13 (h) x 5.44 (v) mm
→ Cell size: 4.4 (h) x 4.4 (v) micro m
→ Active pixels: 1620 (h) x 1236 (v)
→ Read-out modes, Full: 1620 (h) x 1236 (v) 24.98 fps
→ Read-out modes, 1/2 partial scan: 1620 (h) x 712(v) 43.89 fps
→ Read-out modes, 1/4 partial scan: 1620 (h) x 448 (v) 69.75 fps
→ Read-out modes, 1/8 partial scan: 1620 (h) x 316 (v) 98.89 fps
→ Read-out modes, 2/3 partial scan: 1620 (h) x 888 (v) 35.19 fps
→ Read-out modes, Vertical binning: 1620 (h) x 627 (v) 48.87 fps (CM-200PMCL only)
→ Sensitivity: (CM-200 MCL) 0.25 Lux (On sensor, Max. gain, Shutter OFF,50% video)
→ S/N ratio: >50dB (0 dB gain)
→ Video output: 8 or 10 bit in Mini-CL
→ Auto-iris lens video: 0.7 Vp-p
→ Gain: Manual, -3dB to 24dB
→ Synchronization: Int. X-tal or ext. trigger
→ Inputs, Camera Link: Ext. trigger, LVDS (CC 1)
→ Inputs, TTL: Ext. trigger 4V ±2V
→ Outputs, Camera Link: Clk., FVAL, LVAL, Data, EEN
→ Outputs, TTL: XEEN
→ Trigger modes: Pre-select, Pulse Width
→ Electronic shutter, Pre-set shutter: 1/24 to 1/10,000 in 10 steps
→ Electronic shutter, Programmable exposure: 2L (64 micro s) to 1052L (40ms) in 1L steps
→ Electronic shutter, Pulse Width Control: 32 micro s to 2 sec.
→ Accumulation: Auto-detect LVAL-synchr. / asynchr.
→ Control interface: Mini-CL serial communication
→ Functions controlled by serial communication: Shutter, Trigger mode, Readout mode, Trigger Polarity, Black level, Gain
→ Indicators on rear panel: LED for power and trigger input
→ Operating Temperature: -5°C to 45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to 60°C / 20 to 90%
→ Vibration: 10G (20Hz to 200Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC ±10% 3 W (PoCL)
→ Lens mount: C-mount
→ Dimensions: (H x W x L) 29 x 44 x 66 mm
→ Weight: 115 g