JAI CV-A1-20 Compact 1/2" Mega Pixel Progressive Scan Camera With 11 FPS Scan Rate

Price Options:
→ Send Retail Price & Availability → Send Wholesale Discount Quote → Send Educational Discount Quote → Send International Discount Quote → Send Available Government/GSADiscount Quote
Documents & Additional Resources
→ Request Specifications/Datasheet→ Request Technical/Operation Information
→ New compact size 1/2" progressive scan monochrome CCD camera
→ 1392 (h) x 1040 (v) 4.65 μm square pixels
→ 20 MHz version compatible with lower speed frame grabbers
→ 11 frames per second with full resolution
→ Up to 52 fps with partial scan
→ 4 times normal sensitivity with H and V binning
→ Internal, external HD/VD or random trigger synchronization
→ Edge pre-select, pulse width control and start/stop trigger modes
→ Shutter speeds from 1/16 to 1/140,000 second in 16 steps
→ Programmable exposure
→ Frame-delay readout in combination with pulse width controlled shutter
→ Unique smear reduction circuit
→ Exposure enable EEN, write enable WEN and pixel clock output
→ Short ASCII commands for fast mode setup via serial port
→ Setup by Windows 98/NT/2000 software via RS 232C
→ Scanning system: Progressive scan
→ Pixel clock: 20 MHz
→ Line frequency: 11.962 kHz (1672 pixel clock/line)
→ Frame rate for full frame: 11.2 frames/sec. (1068 lines/frame)
→ CCD sensor: Monochrome 1/2" IT CCD
→ Sensing area: 6.35 (h) x 4.81 (v) mm
→ Effective pixels: 1392 (h) x 1040 (v)
→ Pixels in video output, Full:: 1380 (h) x 1035 (v) 11 frames/sec.
→ Pixels in video output, Horizontal binning:: 690 (h) x 1035 (v) 11 frames/sec.
→ Pixels in video output, Vertical binning:: 1380 (h) x 501 (v) 22 frames/sec.
→ Pixels in video output, H + V binning:: 690 (h) x 501 (v) 22 frames/sec.
→ Pixels in video output, 1/2 partial:: 1380 (h) x 513 (v) 21 frames/sec.
→ Pixels in video output, 1/3 partial:: 1380 (h) x 341 (v) 30 frames/sec.
→ Pixels in video output, 1/6 partial:: 1380 (v) x 171 (v) 52 frames/sec.
→ Cell size: 4.65 (h) x 4.65 (v) μm
→ Sensitivity on sensor: o.2 Lux (Max gain, 50% video)
→ S/N ratio: >50 dB
→ Video output: Composite VS signal, 1 Vpp, 75 Ω Video signal 0.7 Vpp (selectable)
→ Cell size: 4.65 (h) x 4.65 (v) μm
→ Sensitivity on sensor: o.2 Lux (Max gain, 50% video)
→ S/N ratio: >50 dB
→ Video output: Composite VS signal, 1 Vpp, 75 Ω Video signal 0.7 Vpp (selectable)
→ Gamma: 0.45 or 1.0
→ Gain: Manual - Automatic
→ Gain range: Man.: -3 to +12 dB - Auto.: 0 to +12 dB
→ Synchronization: Int. X-tal. Ext HD/VD or random trigger
→ HD sync. input/output: 4 V, 75 Ω
→ Trigger input: 4 V, TTL
→ WEN output (write enable): 4 V, 75 Ω
→ EEN out. (exposure enable): 4 V, 75 Ω
→ Pixel clock output: 4 V, 75 Ω
→ Trigger modes: Continuous, Edge pre-select, Pulse width control, Start/stop
→ Readout modes: Frame-delay readout, Smearless, Binning
→ Shutter: 1/11 through 1/140,000 sec.
→ Triggered shutter speed: 1/11 through 1/8400 sec.
→ Programmable exposure: 1023 steps in 83μs increments
→ Long time exposure: 2 frames to 8
→ Smearless readout: Reduced smear at high shutter speeds
→ Functions controlled by internal DIP switches: VD input/output, HD input/output, HD, VD 75 Ω termination on/off
→ Operating temperature: -5°C to +45°C
→ Humidity: 20 - 80% non-condensing
→ Storage temp./humidity: -25°C to +60°C/20% - 80 %
→ Power: 12V DC ± 10%. 1.8 W
→ Lens mount: C-mount
→ Dimensions: 29 x 44 x 66 mm (HxWxD)
→ Weight: 150 g
→ 1392 (h) x 1040 (v) 4.65 μm square pixels
→ 20 MHz version compatible with lower speed frame grabbers
→ 11 frames per second with full resolution
→ Up to 52 fps with partial scan
→ 4 times normal sensitivity with H and V binning
→ Internal, external HD/VD or random trigger synchronization
→ Edge pre-select, pulse width control and start/stop trigger modes
→ Shutter speeds from 1/16 to 1/140,000 second in 16 steps
→ Programmable exposure
→ Frame-delay readout in combination with pulse width controlled shutter
→ Unique smear reduction circuit
→ Exposure enable EEN, write enable WEN and pixel clock output
→ Short ASCII commands for fast mode setup via serial port
→ Setup by Windows 98/NT/2000 software via RS 232C
→ Scanning system: Progressive scan
→ Pixel clock: 20 MHz
→ Line frequency: 11.962 kHz (1672 pixel clock/line)
→ Frame rate for full frame: 11.2 frames/sec. (1068 lines/frame)
→ CCD sensor: Monochrome 1/2" IT CCD
→ Sensing area: 6.35 (h) x 4.81 (v) mm
→ Effective pixels: 1392 (h) x 1040 (v)
→ Pixels in video output, Full:: 1380 (h) x 1035 (v) 11 frames/sec.
→ Pixels in video output, Horizontal binning:: 690 (h) x 1035 (v) 11 frames/sec.
→ Pixels in video output, Vertical binning:: 1380 (h) x 501 (v) 22 frames/sec.
→ Pixels in video output, H + V binning:: 690 (h) x 501 (v) 22 frames/sec.
→ Pixels in video output, 1/2 partial:: 1380 (h) x 513 (v) 21 frames/sec.
→ Pixels in video output, 1/3 partial:: 1380 (h) x 341 (v) 30 frames/sec.
→ Pixels in video output, 1/6 partial:: 1380 (v) x 171 (v) 52 frames/sec.
→ Cell size: 4.65 (h) x 4.65 (v) μm
→ Sensitivity on sensor: o.2 Lux (Max gain, 50% video)
→ S/N ratio: >50 dB
→ Video output: Composite VS signal, 1 Vpp, 75 Ω Video signal 0.7 Vpp (selectable)
→ Cell size: 4.65 (h) x 4.65 (v) μm
→ Sensitivity on sensor: o.2 Lux (Max gain, 50% video)
→ S/N ratio: >50 dB
→ Video output: Composite VS signal, 1 Vpp, 75 Ω Video signal 0.7 Vpp (selectable)
→ Gamma: 0.45 or 1.0
→ Gain: Manual - Automatic
→ Gain range: Man.: -3 to +12 dB - Auto.: 0 to +12 dB
→ Synchronization: Int. X-tal. Ext HD/VD or random trigger
→ HD sync. input/output: 4 V, 75 Ω
→ Trigger input: 4 V, TTL
→ WEN output (write enable): 4 V, 75 Ω
→ EEN out. (exposure enable): 4 V, 75 Ω
→ Pixel clock output: 4 V, 75 Ω
→ Trigger modes: Continuous, Edge pre-select, Pulse width control, Start/stop
→ Readout modes: Frame-delay readout, Smearless, Binning
→ Shutter: 1/11 through 1/140,000 sec.
→ Triggered shutter speed: 1/11 through 1/8400 sec.
→ Programmable exposure: 1023 steps in 83μs increments
→ Long time exposure: 2 frames to 8
→ Smearless readout: Reduced smear at high shutter speeds
→ Functions controlled by internal DIP switches: VD input/output, HD input/output, HD, VD 75 Ω termination on/off
→ Operating temperature: -5°C to +45°C
→ Humidity: 20 - 80% non-condensing
→ Storage temp./humidity: -25°C to +60°C/20% - 80 %
→ Power: 12V DC ± 10%. 1.8 W
→ Lens mount: C-mount
→ Dimensions: 29 x 44 x 66 mm (HxWxD)
→ Weight: 150 g
The JAI's CV-A1-20 is a slower scan rate version of the JAI's popular CV-A1 megapixel camera which has a resolution of 1380 x 1035 and footprint of merely 44 x 66 mm (width x length) and height of 29 mm.
The CV A1-20 boasts a long list of new functions and features, including RS 232C control of all settings of the camera and a number of new trigger modes and readout modes.
The target market for the CVA1-20 camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).
Similar Models:
CV-A1: Compact 1/2" Monochrome Progressive Scan Camera
CV-A1 UV: Compact 1/2" Monochrome Progressive Scan Camera With UV Sensitivity Option










