JAI CV-A1 Compact 1/2" Monochrome Progressive Scan Camera
Price Options:
→ Send Retail Price & Availability → Send Wholesale Discount Quote → Send Educational Discount Quote → Send International Discount Quote → Send Available Government/GSADiscount Quote
Documents & Additional Resources
→ Request Specifications/Datasheet→ Request Technical/Operation Information
→ Compact 1/2" monochrome progressive scan camera
→ 1392 (h) x 1040 (v) 4.65 μm square pixels
→ 16 frames/second with full resolution in continuous operation
→ Increased frame rate with vertical binning and partial scan
→ Increased sensitivity with H and V binning
→ Exposure time from 75.9μs μs to 116 ms using Pulse Width Control mode
→ Programmable exposure from 75.9 μs to 59.8 ms
→ Frame-delay readout mode for multiplexed readout of up to 3 cameras
→ Internal, external HD/VD or random trigger synchronization
→ Smear reduction readout mode
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Exposure enable (EEN), Write enable (WEN) and Pixel Clock output
→ Setup by Windows NT/2000/XP via serial communication
→ Sensor: 1/2" progressive scan
→ Pixel Clock: 28.64 MHz
→ Frame rate full frame: 16.037 frames/second (1068 lines per frame)
→ Active area: 6.4 (h) x 4.8 (v) mm
→ Cell size: 4.65 x 4.65 pixels
→ Active pixels: 1380 x 1035
→ Read-out modes, Full: 1380 (h) x 1035 (v) 16 fps
→ Read-out modes, 1/2 partial scan: 1380 (h) x 513(v) 30 fps
→ Read-out modes, 1/3 partial scan: 1380 (h) x 341 (v) 43 fps
→ Read-out modes, 1/6 partial scan: 1380 (h) x 171 (v) 75 fps
→ Read-out modes, Horizontal binning: 690 (h) x 1035 (v) 16 fps
→ Read-out modes, Vertical binning: 1380 (h) x 527 (v) 32 fps
→ Read-out modes, H + V binning: 690 (h) x 527 (v) 32 fps
→ Read-out modes, Smear-less: Smear reduction
→ Read-out modes, Frame-delay readout: For multi-camera read-out
→ Sensitivity (CV-A1): 0.3 Lux (On sensor, max. gain, shutter off, 50% video)
→ S/N ratio: >50dB (0dB gain)
→ Video output: Composite VS signal, 1Vp-p, 75 Ω Video signal, 0,7Vp-p (selectable)
→ Gain: Manual, -3 to +12 dB Automatic, 0 to +12dB
→ Synchronization: Int. X-tal, Ext. HD/VD or random trigger
→ Inputs, Trigger: 4V, TTL
→ Inputs, HD/VD sync: 4V, 75 Ω or High Z (switchable)
→ Outputs, HD / VD sync.: 4V, 75 Ω
→ Outputs, WEN (Write Enable): 4V, 75 Ω
→ Outputs, EEN (Exposure Enable): 4V, 75 Ω
→ Outputs, Pixel clock: 4V, 75 Ω
→ Trigger modes: Continuous, EPS (Edge Pre-Select), PWC (Pulse Width Control), Long time exposure, Smear reduction and Frame-delay readout
→ Electronic shutter, Pre-set shutter: 1/16 to 1/200,000 in 16 steps
→ Electronic shutter, Programmable exposure (PE): 1.3H to 1000H (75.9 μs to 59.8 ms)
→ Electronic shutter, Pulse Width: 1.3H to 2000H (75.9μs μs to 116 ms)
→ Electronic shutter, Long time exposure: 2 frames to 8
→ Accumulation: HD synchronous or HD asynchronous
→ Control interface: RS-232C, short ASCII commands
→ Functions controlled by RS-232C: Scanning format, Trigger modes, Readout modes, Programmable exposure, Shutter, Gain, Pixel clock output, Sync on/off, Black level, Manual gain, AGC, Gamma
→ Functions controlled by internal DIP-switches: VD input/output, HD input/output, HD/VD 75 Ω termination on/off
→ Operating Temperature: -5 degree C to +45 degree C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25 degree C to +60 degree C / 20 to 90%
→ Vibration: 10G (20Hz to 200 Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC +/-10%. 1.8W
→ Lens mount: C-mount
→ Dimensions (H x W x L): 29 x 44 x 66 mm
→ Weight: 150 g
→ 1392 (h) x 1040 (v) 4.65 μm square pixels
→ 16 frames/second with full resolution in continuous operation
→ Increased frame rate with vertical binning and partial scan
→ Increased sensitivity with H and V binning
→ Exposure time from 75.9μs μs to 116 ms using Pulse Width Control mode
→ Programmable exposure from 75.9 μs to 59.8 ms
→ Frame-delay readout mode for multiplexed readout of up to 3 cameras
→ Internal, external HD/VD or random trigger synchronization
→ Smear reduction readout mode
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Exposure enable (EEN), Write enable (WEN) and Pixel Clock output
→ Setup by Windows NT/2000/XP via serial communication
→ Sensor: 1/2" progressive scan
→ Pixel Clock: 28.64 MHz
→ Frame rate full frame: 16.037 frames/second (1068 lines per frame)
→ Active area: 6.4 (h) x 4.8 (v) mm
→ Cell size: 4.65 x 4.65 pixels
→ Active pixels: 1380 x 1035
→ Read-out modes, Full: 1380 (h) x 1035 (v) 16 fps
→ Read-out modes, 1/2 partial scan: 1380 (h) x 513(v) 30 fps
→ Read-out modes, 1/3 partial scan: 1380 (h) x 341 (v) 43 fps
→ Read-out modes, 1/6 partial scan: 1380 (h) x 171 (v) 75 fps
→ Read-out modes, Horizontal binning: 690 (h) x 1035 (v) 16 fps
→ Read-out modes, Vertical binning: 1380 (h) x 527 (v) 32 fps
→ Read-out modes, H + V binning: 690 (h) x 527 (v) 32 fps
→ Read-out modes, Smear-less: Smear reduction
→ Read-out modes, Frame-delay readout: For multi-camera read-out
→ Sensitivity (CV-A1): 0.3 Lux (On sensor, max. gain, shutter off, 50% video)
→ S/N ratio: >50dB (0dB gain)
→ Video output: Composite VS signal, 1Vp-p, 75 Ω Video signal, 0,7Vp-p (selectable)
→ Gain: Manual, -3 to +12 dB Automatic, 0 to +12dB
→ Synchronization: Int. X-tal, Ext. HD/VD or random trigger
→ Inputs, Trigger: 4V, TTL
→ Inputs, HD/VD sync: 4V, 75 Ω or High Z (switchable)
→ Outputs, HD / VD sync.: 4V, 75 Ω
→ Outputs, WEN (Write Enable): 4V, 75 Ω
→ Outputs, EEN (Exposure Enable): 4V, 75 Ω
→ Outputs, Pixel clock: 4V, 75 Ω
→ Trigger modes: Continuous, EPS (Edge Pre-Select), PWC (Pulse Width Control), Long time exposure, Smear reduction and Frame-delay readout
→ Electronic shutter, Pre-set shutter: 1/16 to 1/200,000 in 16 steps
→ Electronic shutter, Programmable exposure (PE): 1.3H to 1000H (75.9 μs to 59.8 ms)
→ Electronic shutter, Pulse Width: 1.3H to 2000H (75.9μs μs to 116 ms)
→ Electronic shutter, Long time exposure: 2 frames to 8
→ Accumulation: HD synchronous or HD asynchronous
→ Control interface: RS-232C, short ASCII commands
→ Functions controlled by RS-232C: Scanning format, Trigger modes, Readout modes, Programmable exposure, Shutter, Gain, Pixel clock output, Sync on/off, Black level, Manual gain, AGC, Gamma
→ Functions controlled by internal DIP-switches: VD input/output, HD input/output, HD/VD 75 Ω termination on/off
→ Operating Temperature: -5 degree C to +45 degree C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25 degree C to +60 degree C / 20 to 90%
→ Vibration: 10G (20Hz to 200 Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC +/-10%. 1.8W
→ Lens mount: C-mount
→ Dimensions (H x W x L): 29 x 44 x 66 mm
→ Weight: 150 g
The JAI's CV-A1 megapixel camera has a resolution of 1380 x 1035 and footprint of merely 44 x 66 mm (width x length) and height of 29 mm.
The CV A1 boasts a long list of new functions and features, including RS 232C control of all settings of the camera and a number of new trigger modes and readout modes.
The target market for the CVA1 camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).
A special UV enhanced, CV-A1 UV, as well as a slower scan version, CV-A1-20, is also available.
Similar Models:
CV-A1 UV: Compact 1/2" Monochrome Progressive Scan Camera With UV Sensitivity Option
CV-A1-20: Compact 1/2" Mega Pixel Progressive Scan Camera With 11 FPS Scan Rate
