AVSupply

4575 Ruffner St., San Diego, CA 92111 | P: 858.565.1101 | T: 800.284.2288 | F: 858.565.7845 | E: sales@avsupply.com

#1 ELECTRONICS DISTRIBUTOR IN WHOLESALE | GOVERNMENT/GSA | EDUCATION | INTERNATIONAL

JAI CV-A11 1/3" Monochrome Progressive Scan Camera

JAI CV-A11 1/3" Monochrome Progressive Scan Camera

Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.


Price Documents
Compact 1/3" monochrome progressive scan camera
648 (h) x 492 (v) 7.4 μm square pixels
30 frames/second with full resolution in continuous operation
High S/N ratio >56 dB
Increased frame rate with partial scan
Exposure time from 76μs μs to 116 ms using Pulse Width Control mode
Programmable exposure from 76 μs to 60 ms
Frame-delay readout mode for multiplexed readout of up to 3 cameras
Internal, external HD/VD or random trigger synchronization
Smear reduction readout mode
LVAL-synchronous/-asynchronous operation (auto-detect)
Exposure enable (EEN), Write enable (WEN) and Pixel Clock output
Setup by Windows NT/2000/XP via serial communication
Sensor: 1/3" progressive scan
Pixel Clock: 12.2727 MHz
Frame rate full frame: 29.96 frames/second (525 lines per frame)
Active area: 4.8 (h) x 3.6 (v) mm
Cell size: 7.4 x 7.4 pixels
Active pixels: 648 x 492
Read-out modes, Full: 648 (h) x 492 (v) 30 fps
Read-out modes, 1/2 partial scan: 648 (h) x 240 (v) 58 fps
Read-out modes, 1/3 partial scan: 648 (h) x 160 (v) 73 fps
Read-out modes, 1/6 partial scan: 648 (h) x 80 (v) 124 fps
Read-out modes, Smear-less: Smear reduction
Read-out modes, Frame-delay readout: For multi-camera read-out
Sensitivity: 0.05 Lux (On sensor, max. gain, shutter off, 50% video)
S/N ratio: >56dB (0dB gain)
Video output: Composite VS signal, 1Vp-p, 75 Ω Video signal, 0,7Vp-p (selectable)
Gain: Manual, -3 to +12 dB; Automatic, 0 to +12dB
Gamma: 0.45 or 1.0
Synchronization: Int. X-tal, Ext. HD/VD or random trigger
Inputs, Trigger: 4V, TTL
Inputs, HD/VD sync: 4V, 75 Ω or High Z (switchable)
Outputs, HD / VD sync.: 4V, 75 Ω
Outputs, WEN (Write Enable): 4V, 75 Ω
Outputs, EEN (Exposure Enable): 4V, 75 Ω
Outputs, Pixel clock: 4V, 75 Ω
Trigger modes: Continuous, EPS (Edge Pre-Select), PWC (Pulse Width Control), Long time exposure, Smear reduction and Frame-delay readout
Electronic shutter, Pre-set shutter: 1/30 to 1/200,000 in 16 steps
Electronic shutter, Programmable exposure(PE): 1.3H to 1oooH (75.9 μs to 59.8 ms)
Electronic shutter, Pulse Width: 1.3H to 2000H (75.9 μs to 116 ms)
Electronic shutter, Long time exposure: 2 frames to 8
Accumulation: HD synchronous or HD asynchronous
Control interface: RS-232C, short ASCII commands
Functions controlled by RS-232C: Scanning format, Trigger modes,Readout modes, Programmable exposure, Shutter, Gain, Pixel clock output, Sync on/off, Black level, Manual gain, AGC, Gamma
Functions controlled by internal DIP-switches: VD input/output, HD input/output, HD/VD 75 Ω termination on/off
Operating Temperature: -5 °C to +45 °C
Humidity (operation): 20 - 90% non-condensing
Storage temp./humidity: -25 °C to +60 °C / 20 to 90%
Vibration: 10G (20Hz to 200 Hz XYZ)
Shock: 70G
Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
Power: 12V DC +/-10%. 1.5W
Lens mount: C-mount
Dimensions (H x W x L): 29 x 44 x 66 mm
Weight: 150 g

The JAI's CV A11 has a footprint of merely 44 x 66 mm (width x length) and height of 29 mm and boasts a long list of new functions and features. These include RS 232C control of all settings of the camera, a number of new trigger modes and readout modes.

The target market for the CV A11 camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).