JAI CV-A2 1/1.8" Monochrome Progressive Scan 2 MP Camera

→ Compact 1/1.8" monochrome progressive scan camera
→ 1620 (h) x 1220 (v) 4.4 μm square pixels
→ 15 frames/second with full resolution in continuous operation
→ Increased frame rate with partial scan and vertical binning
→ Increased sensitivity with vertical binning
→ Exposure time from 53.1 μs to 108.7 ms using Pulse Width Control mode
→ Programmable exposure from 76.5 μs to 66.5 ms
→ Frame-delay readout mode for multiplexed readout of up to 3 cameras
→ Internal, external HD/VD or random trigger synchronization
→ Smear reduction readout mode
→ LVAL-synchronous/-asynchronous operation (auto-detect)
→ Exposure enable (EEN), Write enable (WEN) and Pixel Clock output
→ RS 232C interface
→ Setup by Windows NT/2000/XP via serial communication
→ Sensor: 1/1.8" progressive scan
→ Pixel Clock: 36.15 MHz
→ Frame rate full frame: 15 frames/second (1252 lines per frame)
→ Active area: 7.12 (h) x 5.36 (v) mm
→ Cell size: 4.4 x 4.4 pixels
→ Active pixels: 1620 x 1220
→ Read-out modes, Full: 1620 (h) x 1220 (v) 15 fps
→ Read-out modes, 1/2 partial scan: 1620 (h) x 610 (v) 28 fps
→ Read-out modes, 1/3 partial scan: 1620 (h) x 408 (v) 40 fps
→ Read-out modes, 1/6 partial scan: 1620 (h) x 204 (v) 70 fps
→ Read-out modes, Vertical binning: 1620 (h) x 594 (v) 30 fps
→ Read-out modes, Smear-less: Smear reduction
→ Read-out modes, Frame-delay readout: For multi-camera read-out
→ Sensitivity: 0.3 Lux (On sensor, max. gain, shutter off, 50% video)
→ S/N ratio: >50dB (0dB gain)
→ Video output: Composite VS signal, 1Vp-p, 75Ω; Video signal, 0,7Vp-p (selectable)
→ Auto-iris lens video output: 0.7Vp-p
→ Gain: Manual, -3 to +12 dB; Automatic, -3 to +12dB
→ Synchronization: Int. X-tal, Ext. HD/VD or random trigger
→ Inputs, Trigger: 4V, TTL
→ Inputs, HD/VD sync: 4V, 75Ω or High Z (switchable)
→ Outputs, HD / VD sync.: 4V, 75Ω
→ Outputs, WEN (Write Enable): 4V, 75Ω
→ Outputs, EEN (Exposure Enable): 4V, 75Ω
→ Outputs, Pixel clock: 4V, 75Ω
→ Trigger modes: Continuous, EPS (Edge Pre-Select), PWC (Pulse Width Control), Long time exposure, Smear reduction and Frame-delay readout
→ Electronic shutter, Pre-set shutter: 1/15 to 1/200,000 in 16 steps,
→ Electronic shutter, Programmable exposure (PE): 1.44H to 1252.44H (76.5 μs to 66.5 ms),
→ Electronic shutter, Pulse Width: 1H to 2047H (53.1 μs to 108.7 ms),
→ Electronic shutter, Long time exposure: 2 frames to ∞
→ Accumulation: HD synchronous or HD asynchronous
→ Control interface: RS-232C, short ASCII commands
→ Functions controlled by RS-232C: Scanning format, Trigger modes, Readout modes, Programmable exposure, Shutter, Gain, Pixel clock output, Sync on/off, Black level, Manual gain, AGC
→ Functions controlled by internal DIP-switches: VD input/output, HD input/output, HD/VD 75Ω termination on/off
→ Operating Temperature: -5°C to +45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to +60°C / 20 to 90%
→ Vibration: 10G (20Hz to 200 Hz XYZ)
→ Shock: 70G
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3),FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC +/-10%. 2.3W
→ Lens mount: C-mount
→ Dimensions (H x W x L): 29 x 44 x 66 mm
→ Weight: 150 g