JAI CV-A50C 1/2" Monochrome Interlaced Scan Camera, CCIR Video Standard

→ New compact size 1/2" and 1/3" monochrome CCD cameras
→ CCIR: 752 (h) x 582 (v) pixels. EIA: 768 (h) x 494 (v) pixels
→ Improved sensitivity, dynamic range and smear performance
→ High S/N ratio up to 60 dB
→ Extended range of functions and options compared with CV-M50
→ Shutter speeds from Off to 1/10,000 sec.
→ Programmable exposure
→ Interlaced or non-interlaced scanning. Field or frame accumulation
→ Internal, external HD/VD or random trigger synchronization
→ Edge pre-select, pulse width control, start/stop trigger modes
→ Long time exposure with external VD pulse interval
→ Frame-delay read out in connection with pulse width controlled shutter
→ Exposure enable EEN, write enable WEN and pixel clock output
→ Short ASCII commands for fast mode setup via serial port
→ Setup by Windows 95/98/NT software via RS 232C
→ Scanning system, CCIR: 625 lines 25 frames/sec
→ CCD sensor CV-A50: Monochrome 1/2" IT CCD
→ Sensing area, CV-A50: 6.4 (h) x 4.8 (v) mm
→ Effective pixels, CCIR: 752 (h) x 582 (v)
→ Pixels in video output, CCIR: 737 (h) x 575 (v)
→ Cell size, CV-A50, CCIR: 86. (h) x 8.3 (v) μm
→ Resolution horizontal 570 TV lines
→ Sensitivity on sensor, CV-A50: 0.03 Lux, Max gain, 50% video
→ S/N ratio, CV-A50, CCIR: 59 dB
→ Video output Composite VS signal, 1.0 Vpp, 75 Ω
→ Gamma 0.45 or 1.0
→ Gain: Manual - Automatic
→ Gain range: 0 to +15 dB
→ Accumulation: Field-Frame
→ Synchronization: Int. X-tal. Ext HD/VD or random trigger
→ Scanning: 2:1 interlaced, non-interlaced
→ HD sync. input/output: 4 V, 75 Ω
→ Trigger input: 4 V, 75 Ω
→ WEN output (write enable): 4 V, 75 Ω
→ EEN out. (exposure enable): 4 V, 75 Ω
→ Pixel clock output: 4 V, 75 Ω
→ Shutter: (off), 1/100, 1/250, 1/500, 1/1,000, 1/2000, 1/4000, 1/10,000 sec.
→ Pulse width control: 1.5 H to 1000 H
→ Start/stop, CCIR: 1/50 to 1/10,000 sec.
→ Long time exposure: 1 field to ∞
→ Programmable exposure: 2.5 H to 252.5 H
→ Frame delay readout: Time from PWC trigger input to ext. VD input
→ Functions controlled by RS-232C: Scanning format, Trigger mode,Shutter speed, Trigger/WEN polarity, Accumulation, Shutter mode, Programmable exposure, AGC level, White clip, Setup, Manual gain, AGC/manual gain, Internal/potentiometergain set, Gamma, Pixel clock, Commands and internal adjustments
→ Functions controlled by DIP switches: VD input/output, HD input/output, internal HD and VD 75 Ω termination on/off
→ Operating temperature: -5°C to +45°C
→ Humidity: 20 - 80% non-condensing
→ Storage temp./humidity: -25°C to 60°C/20% - 90%
→ Power: 12V DC ±10% 1.5 W
→ Lens mount: C-mount
→ Dimensions: 29 x 44 x 66 mm (HxWxD)
→ Weight: 150 g