JAI CV-M300E 2/3" Interlaced Scan EIA Industrial Monochrome CCD Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ monochrome CCD camera
→ EIA (RS-170) video standard
→ 768 (h) x 494 (v) pixels
→ Increased sensitivity and improved dynamic range
→ Reduced smear level
→ Asynchronous reset
→ High S/N ratio >58 dB
→ Interlaced or non-interlaced scanning
→ Field or frame accumulation mode
→ Internal, external HD/VD or random synchronization
→ Random trigger with edge pre-select, start/stop and pulse width control shutter
→ Long time exposure with external VD pulses
→ HD/VD input or output TTL or 75 Ohm
→ Exposure enable (EEN) and write enable (WEN) output
→ Pixel clock output for frame grabber friendly interface
→ Rugged and compact construction
→ Scanning system: 525 lines 30 frames/sec.
→ CCD sensor: Monochrome 2/3" IT CCD
→ Sensing area: 8.8 mm (h) x 6.6 mm (v)
→ Effective pixels: 768 (h) x 494 (v)
→ Pixels in video output: 758 (h) x 486 (v)
→ Cell size: 11.6 (h) x 13.5(v) μm
→ Resolution (horizontal): 570 TV lines
→ Sensitivity on sensor: 0.05 Lux, Max gain, 50% video
→ S/N ratio: >59 dB (AGC off, Gamma 1)
→ Video output: Composite VS signal 1.0 Vpp, 75 Ohm
→ Gamma: 0.45 – 1.0
→ Gain: Manual – Automatic, Potentiometer – AGC
→ Gain range: 0 to +18 dB
→ Scanning: 2:1 interlace – non-interlace
→ Accumulation: Field – frame
→ Synchronization: Int. X-tal. or Ext. HD/VD or random trigger
→ HD sync. input/output: 4 Vpp, 75 Ohm*
→ VD sync. input/output: 4 Vpp, 75 Ohm*
→ Trigger input: 4 Vpp, 75 Ohm*
→ WEN output: (write enable) 4 Vpp, 75 Ohm*
→ EEN output: (exposure enable) 4 Vpp , 75 Ohm*
→ Pixel clock out (optional): 4 Vpp, 75 Ohm
→ Trigger modes: Normal, Edge pre-select,Pulse width control and Start/stop
→ Trigger input duration: >H to <1000H. (CCIR: 64 μsec. to 1 msec., EIA: 63.5 μsec. to 1 msec.)
→ Internal and edge pre-select: 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
→ Pulse width control: 1H to 251H
→ Start/stop: 1/77 to 1/10,000 sec.
→ Long time exposure: 1 field to ∞ Duration between ext. VD pulses
→ Operating temperature: -5°C to + 45°C
→ Humidity: 20 – 80% non-condensing
→ Power: 12V DC ±10%. 3.6 W
→ Lens mount: C-mount
→ Dimensions: 40 x 50 x 80 mm (HxWxD)
→ Weight: 230 g
* HD sync., VD sync./(Trigger) input or output by internal jumpers. Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by internal jumpers. Factory setting: 75 Ohm terminated.
→ EIA (RS-170) video standard
→ 768 (h) x 494 (v) pixels
→ Increased sensitivity and improved dynamic range
→ Reduced smear level
→ Asynchronous reset
→ High S/N ratio >58 dB
→ Interlaced or non-interlaced scanning
→ Field or frame accumulation mode
→ Internal, external HD/VD or random synchronization
→ Random trigger with edge pre-select, start/stop and pulse width control shutter
→ Long time exposure with external VD pulses
→ HD/VD input or output TTL or 75 Ohm
→ Exposure enable (EEN) and write enable (WEN) output
→ Pixel clock output for frame grabber friendly interface
→ Rugged and compact construction
→ Scanning system: 525 lines 30 frames/sec.
→ CCD sensor: Monochrome 2/3" IT CCD
→ Sensing area: 8.8 mm (h) x 6.6 mm (v)
→ Effective pixels: 768 (h) x 494 (v)
→ Pixels in video output: 758 (h) x 486 (v)
→ Cell size: 11.6 (h) x 13.5(v) μm
→ Resolution (horizontal): 570 TV lines
→ Sensitivity on sensor: 0.05 Lux, Max gain, 50% video
→ S/N ratio: >59 dB (AGC off, Gamma 1)
→ Video output: Composite VS signal 1.0 Vpp, 75 Ohm
→ Gamma: 0.45 – 1.0
→ Gain: Manual – Automatic, Potentiometer – AGC
→ Gain range: 0 to +18 dB
→ Scanning: 2:1 interlace – non-interlace
→ Accumulation: Field – frame
→ Synchronization: Int. X-tal. or Ext. HD/VD or random trigger
→ HD sync. input/output: 4 Vpp, 75 Ohm*
→ VD sync. input/output: 4 Vpp, 75 Ohm*
→ Trigger input: 4 Vpp, 75 Ohm*
→ WEN output: (write enable) 4 Vpp, 75 Ohm*
→ EEN output: (exposure enable) 4 Vpp , 75 Ohm*
→ Pixel clock out (optional): 4 Vpp, 75 Ohm
→ Trigger modes: Normal, Edge pre-select,Pulse width control and Start/stop
→ Trigger input duration: >H to <1000H. (CCIR: 64 μsec. to 1 msec., EIA: 63.5 μsec. to 1 msec.)
→ Internal and edge pre-select: 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
→ Pulse width control: 1H to 251H
→ Start/stop: 1/77 to 1/10,000 sec.
→ Long time exposure: 1 field to ∞ Duration between ext. VD pulses
→ Operating temperature: -5°C to + 45°C
→ Humidity: 20 – 80% non-condensing
→ Power: 12V DC ±10%. 3.6 W
→ Lens mount: C-mount
→ Dimensions: 40 x 50 x 80 mm (HxWxD)
→ Weight: 230 g
* HD sync., VD sync./(Trigger) input or output by internal jumpers. Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by internal jumpers. Factory setting: 75 Ohm terminated.
The JAI's CV-M300E offers the advantages of a large 2/3" format CCD in a compact mechanical format. The CV M300E's 2/3" sensor has a superior light gathering capability due to the increased pixel size. The CVM300E is ideal for applications that require increased sensitivity, improved image quality and for systems incorporating coupling to devices like intensifiers or X-ray tubes.
Similar Models:
CV-M300C: 2/3" Interlaced Scan CCIR Industrial Monochrome CCD Camera
