JAI CV-M50E High Resolution 1/2" EIA Industrial Monochrome CCD Camera

→ High resolution 1/2" monochrome CCD camera
→ EIA video standard
→ Asynchronous reset
→ Easy external settings
→ EIA: 768 (h) X 494 (v) pixels
→ Improved sensitivity, dynamic range and smear performance
→ High S/N ratio >56 dB
→ Interlaced or non-interlaced scanning
→ Field or frame accumulation
→ Internal, external HD/VD or random trigger synchronization
→ HD/VD synchronization input/output. - TTL or 75 Ohm
→ Edge pre-select, pulse width control and start/stop trigger modes
→ Long time exposure with external VD pulse interval
→ Exposure enable EEN, write enable WEN and pixel clock output
→ Frame grabber friendly interface
→ Rugged and compact construction
→ Scanning system: 525 lines 30 frames/sec.
→ Pixel clock: 14.35 MHz
→ CCD sensor: 1/2" Monochrome IT CCD
→ Sensing area: 6.5 (h) x 4.8 (v) mm
→ Effective pixels: 768 (h) x 494 (v)
→ Pixels in video output: 758 (h) x 486 (v)
→ Cell size: 8.4 (h) x 9.8 (v) μm
→ Sensitivity on sensor: 0.05 Lux (Max. gain, 50% video)
→ S/N ratio: >56 dB
→ Video output: Composite VS signal 1.0 Vpp, 75 Ω
→ Gamma: 1.0 - 0.45
→ Gain: Manual - Automatic 0 to +15 dB
→ Scanning: 2:1 interlaced - non-interlaced
→ Accumulation: Field - frame
→ Synchronization: Int. X-tal. Ext HD/VD or random trigger
→ HD sync. input/output: 4V, 75 Ω*
→ VD sync. input/output: 4V, 75 Ω*
→ Trigger input: 4V, 75 Ω*
→ Trigger input duration: >64 μsec. to <1 msec.
→ WEN output (write enable): 4V, 75 Ω
→ EEN output (exposure enable): 4V , 75 Ω
→ Pixel clock out (optional): 4V, 75 Ω, sine
→ Shutter speed: Off, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
→ Edge pre-select shutter: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
→ Pulse width control: >1H (64 μsec.) to <60 msec.
→ Start/stop: 1/77 to 1/10,000 second
→ Long time exposure: 1 field to ∞. Duration between ext. VD pulses
→ Operating temperature: -5°C to +45°C
→ Humidity: 20 - 80% non-condensing
→ Storage temp./humidity: -25°C to 60°C/20% - 90%
→ Power: 12V DC ±10%. 2.5W
→ Lens mount: C-mount
→ Dimensions: 40 x 50 x 80 mm (HxWxD)
→ Weight: 245 g

* HD sync., VD sync./(Trigger) input or output by internal straps. HD/VD input from factory. Inputs TTL or 75 Ohm terminated by internal straps. 75 Ohm terminated from factory.