
JAI CV-M71CL 1/2" CCD Bayer Mosaic Color Progressive Scan Camera
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ RGB primary color mosaic CCD (Bayer) with internal RGB interpolation
→ 782 (h) x 582 (v) 8.3μm square pixels
→ 60 fps with full resolution
→ 250 fps with 1/8 partial scan
→ 24 bit RGB output via Camera Link base configuration
→ 8 or 10 bit raw output via Camera Link for host based RGB interpolation
→ High speed shutter from 1/60 to 1/300,000 second
→ Edge pre-select and pulse width control trigger modes
→ Programmable exposure, auto shutter and smearless readout
→ LVAL synchronous or asynchronous accumulation
→ Fixed, manual or one push white balance
→ Auto iris lens video output, auto shutter and AGC allow a wider light range
→ Partial scan readout
→ Setup by Windows NT/2000/XP software via RS 232C or Camera Link
→ Sensor: 1/2" progressive scan Bayer mosaic CCD
→ Pixel clock: 36.15 MHz
→ Frame rate full frame: 60 frames/sec
→ Active area: 6.4 (h) x 4.8 (v) mm
→ Cell size: 8.3 (h) x 8.3 (v) μm
→ Active pixels: 767 (h) x 576 (v)
→ Readout modes, Full: 767 (h) x 576 (v) 60 fps
→ Readout modes, 1/2 partial: 767 (h) x 287 (v) 112 fps
→ Readout modes, 1/4 partial: 767 (h) x 143 (v) 177 fps
→ Readout modes, 1/8 partial: 767 (h) x 143 (v) 250 fps
→ Readout modes, Smear-less: Only in conjunction with trigger
→ Sensitivity: 1.7 Lux (On sensor, Max. gain, 50% video)
→ S/N ratio: >54 dB
→ Video output: 24-bit RGB in Camera Link; 8/10-bit raw Bayer video in Camera Link
→ Auto-iris lens video: 0.7 Vpp
→ Gain. Manual: -3 to +12 dB
→ Gain. Automatic: -3 to +9 dB
→ Gamma: 1.0
→ Synchronization: Int. X-tal. Ext. HD/VD or random trigger
→ Inputs, Camera Link: Ext. Trigger
→ Inputs, TTL: Ext. Trigger TTL 4V ±2V; Ext. HD/VD 4 V ±2 V. TTL or 75 Ω; terminated (Continuous mode only)
→ Outputs, Camera Link: Pixel clock, LVAL, FVAL, DVAL, EEN, XEEN
→ Outputs, TTL: n/a
→ Trigger modes: Continuous, edge pre-select and pulse width control
→ Accumulation: Sync. to next LVAL or asynchronous (no-delay)
→ Electronic shutter, Pre-set shutter: 1/60 to 1/300.000 sec. in 15 steps
→ Electronic shutter, Programmable exposure: 1/8L to 625L (3.3μs to 16.7ms)
→ Electronic shutter, Pulse-width control: 2L to 120 frames (33μs to 2 sec.)
→ Electronic shutter, Auto shutter: 1/60 to 1/25,000 sec.
→ White balance: One-push WB button on rear panel; Manual, R and B, 2800 to 7000k; Fixed 3200, 4600 and 5600K
→ Control interface: RS 232C or Camera Link
→ Functions controlled by serial communication: Shutter, Trigger, Scanning, Readout, Polarity, Black level, Gain
→ Indicators on rear panel: LED for power and trigger input
→ Operating temperature: -5°C to +45°C
→ Humidity: 20 - 80% non-condensing
→ Storage temp./humidity: -25°C to +60°C/ 20% to 80%
→ Vibration: 10G (20Hz to 200Hz XYZ)
→ Regulations: CE (EN 61000-6-2, EN 61000-6-3), FCC part 15 class B, RoHS /WEEE
→ Power: 12V DC ± 10%. 5 W
→ Lens mount: C-mount
→ Dimensions: (H x W x L) 40 x 50 x 80 mm
→ Weight: 210 g
The JAI's CV-M71CL uses the latest generation of RGB primary Bayer mosaic progressive scan 1/2" CCD sensors with 767 x 576 active pixels resolution (SVGA).
The CV M71CL's 1/2" format has the advantage of a large pixel size (8.3 x 8.3 μm), which results in higher sensitivity. The camera operates at 60 fps (full resolution), or up to 250 fps in partial scan mode.
The CVM71CL camera outputs 24-bit RGB via Camera Link. Alternatively the CV-M71CL can output 8 or 10 bit raw Bayer images for host-based color interpolation. The standard asynchronous trigger modes make the CV M71CL ideal for a wide range of industrial vision and ITS applications.










