JAI CV-M91P PAL 3CCD Area Scan Interlace Color Camera

→ CV-M91P
→ 3 x 1/3? CCD RGB color camera for vision applications
→ PAL: 752 (h) x 582 (v) pixels
→ Compact RGB prism for C-mount lenses
→ 570 TV lines horizontal resolution. S/N ratio >54 dB
→ RGB, Y/C and composite video output
→ Composite sync input and output
→ Internal, external HD/VD or random trigger synchronization
→ Edge pre-select (EPS), pulse width control (PWC) and start/stop trigger modes
→ CCD iris and AGC for automatic light regulation
→ Manual or one push white balance
→ Interlaced or non-interlaced scanning. Field or frame accumulation
→ Long time exposure modes
→ EEN, WEN and pixel clock output for easy interfacing
→ Rugged and compact construction
→ Setup by Windows NT/2000/XP software via RS 232C
→ Ideal applications include color applications such as online inspection, sorting and color printing
→ Scanning system: CCIR PAL, 25 frames/sec.; 625 lines, 2:1 Interlaced
→ Frame rate: 50 Hz
→ Line frequency: 15.625 kHz
→ Pixel frequency: 14.25 MHz
→ CCD sensors: 3 x 1/3" monochrome IT CCD, ICX-409AL-6
→ Sensing area: 4.8 (h) x 3.6 (v) mm
→ Effective pixels: 752 (h) x 582 (v)
→ Pixels in video output: 744 (h) x 575 (v)
→ Cell size: 6.5 (h) x 6.25 (v) μm
→ Resolution horizontal: 570 TV lines
→ Sensitivity (on sensor): 0.5 Lux, Max gain, 50% video
→ S/N ratio: 54 dB
→ Video outputs. (DC coupled): RGB, Y/C PAL, VBS PAL
→ Video output level: RGB and C signal, 0.7 Vpp, 75 Ω, G on sync, Y signal and Composite VS, 1.0 Vpp, 75 Ω
→ Gamma: 1.0 - 0.45
→ Gain: Manual - Automatic
→ Gain range: 0 to +18 dB
→ Accumulation: Field - Frame
→ Synchronization: Int. X-tal. Ext HD/VD or random trigger
→ Scanning: 2:1 interlaced, non-interlaced
→ Composite VS input: 1.0 Vpp ±0.3V. 75 Ω terminated
→ Composite sync output: 4 Vpp from 75 Ω source
→ HD/VD sync input: 4 Vpp ±2 V. (Termination TTL or 75 Ω )
→ HD/VD sync output: 4 Vpp from 75 Ω source
→ Trigger input: 4 Vpp ±2 V. (Termination TTL or 75 Ω )
→ WEN output (write enable): 4 Vpp from 75 Ω source
→ EEN output (exposure enable): 4 Vpp from 75 Ω source
→ Pixel clock output: 4 Vpp from 75 Ω source
→ Shutter. Continuous and Edge pre-select: (off), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 sec.
→ Pulse width control input: 1 H to 900 H
→ Start/stop: 1/10,000 to 1/77 second
→ Long time exposure: 1 field to ∞
→ White balance: Manual, one push (2350 to 6400 K)
→ Functions controlled by: Trigger mode, Shutter speed, Accumulation, Interlace, AGC level, White clip,
→ RS 232C: Set-up, Manual gain, AGC/manual gain, Internal/ potentiometer gain set, Gamma, white balance.
→ Functions controlled by internal DIP switches: VD input/output, HD input/output, HD, VD and Trigger 75 termination on/off
→ Operating temperature: -5°C to +45°C.
→ Humidity: 20 - 80% non-condensing
→ Storage temp./humidity: -25°C to 60°C./20% - 90 % non-condensing
→ Vibration: 3 G (15 Hz - 200 Hz in XYZ)
→ Shock: 50 G
→ Regulations: CE (EN 50081-1, EN 50082-1) FCC part 15
→ Power: 12V DC ± 10%. 6 W
→ Lens mount: C-mount. (Max 4.0 mm thread)
→ Dimensions: 50 x 60 x 130 mm (HxWxD)
→ Weight: 480 g / 1 lb