JAI CV-M9CL Digital 3CCD Progressive Scan RGB Color Camera

→ 3 x 1/3" progressive scan RGB color CCD camera
→ 1024 (h) x 768 (v) 4.65 μm active square pixels for each CCD
→ Compact RGB prism for C-mount lenses
→ Chromatic shading reduction makes lens choice wider
→ 30 frames per second with full resolution
→ 86 fps with 1/8 partial scan
→ Vertical binning for higher sensitivity and frame rate
→ 12-bit internal digital signal processing
→ 24-bit RGB output via Camera Link base configuration. 30-bit via CL medium configuration
→ Edge pre-select and pulse width trigger modes
→ Reset continuous trigger mode and smear-less mode
→ Programmable individual exposure for R, G and B
→ Manual, continuous or one push white balance
→ Color bar test image for set-up
→ Setup by switches or Windows NT/2000/XP software via RS 232C or Camera Link
→ Sensor: 3 x 1/3" progressive scan CCD
→ Pixel Clock: 33.75 MHz
→ Frame rate full frame: 30 frames/sec. (792 lines per frame)
→ Active area: 4.8 (h) x 3.6 (v) mm
→ Cell size: 4.65 (h) x 4.65 (v) μm
→ Active pixels: 1024 (h) x 768 (v)
→ Readout modes, Full: 1024 (h) x 768 (v) 30 fps
→ Readout modes, 1/2 partial: 1024 (h) x 384 (v) 48 fps
→ Readout modes, 1/4 partial: 1024 (h) x 192 (v) 68 fps
→ Readout modes, 1/8 partial: 1024 (h) x 96 (v) 86 fps
→ Readout modes, Vertical binning: 1024 (h) x 384 (v) 50 fps
→ Sensitivity: 2 Lux (On sensor, Max gain, 50% video)
→ S/N ratio: >50 dB (Green ch., 0 dB gain)
→ Video output: 3 x 8 bit RGB: Base config. CL, 3 x 10 bit RGB: Medium config. CL
→ Auto-iris lens video: 0.7 Vp-p, 75 Ω
→ Gain, manual: Master -3 to +12 dB, R and B -6 to +6 dB
→ Synchronization: Int. X-tal or ext. trigger
→ Inputs, Camera Link: Ext. trigger, LVDS (CC 1)
→ Inputs, TTL: Ext. trigger, 4V ± 2V (TTL)
→ Outputs, Camera Link: Clk, LVAL, FVAL, Data, EEN
→ Outputs, TTL: XEEN
→ Trigger modes Continuous, Edge Pre-Select, Pulse Width: Control, Reset Continuous, Smear-less
→ Electronic shutter, Pre-set shutter: 1/30 to 1/50,000 sec. in 12 steps
→ Electronic shutter, Programmable exposure: 0.5L to 791L in 42μs steps. Common and R, G, B individual
→ Electronic shutter, Pulse Width Control: 2L (84μs) to 23,706L (1 sec.)
→ White balance: Manual, R and B, -6dB to +6dB One-push automatic, 2800 to 6500K Continuous automatic, 2800 to 6500K Fixed 3200, 4600 and 5600K
→ Knee function: Knee point and slope for R, G and B
→ Control interface: Camera Link or RS 232C
→ Functions controlled by serial communication: Shutter, trigger mode, readout mode, trigger input and polarity, white balance, gain, knee, black level
→ Indicators on rear panel: LED for power and trigger input
→ Operating Temperature: -10°C to +45°C
→ Humidity (operation): 20 - 90% non-condensing
→ Storage temp./humidity: -25°C to +60°C / 20 to 90%
→ Vibration: 3G (15Hz to 200 Hz XYZ)
→ Regulations: CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE
→ Power: 12V DC ±10% 6 W
→ Lens mount: C-mount (Max 4.0 mm thread)
→ Dimensions (H x W x L): 50 mm x 60 mm x 99 mm
→ Weight: 400 g