Kappa PS4-285FW Digital B/W Camera With FireWire

→ CCD sensor: 2/3" interline transfer CCD progressive scan with micro lenses (Sony ICX285AL, EXview HAD)
→ Pixel size (HxV): 6.45 µm x 6.45 µm
→ Light-sensitive area (HxV): 8.93 mm x 6.66 mm
→ Number of pixels (HxV): 1434 x 1050 total
→ Spectral sensitivity (without IR -filter): 320 nm - 1100 nm
→ Full well capacity: 23 000e¯
→ A/D-conversion factor: 5.6e¯ / increment
→ Dynamic range: 63 dB (measured in dark image, at 66 ms exposure time at 0 dB gain)
→ Sensitivity: 0.02 |x at 100 ms exposure time; 0.000017 |x at 120 s exposure time (measured at 18dB gain, gamma = 1, and 50% level, 3000K)
→ Color Coding: Mono 8, Mono 16
→ Camera output format (IIDC Format 7)* full frame: 1430 x 1050 pixel, Mono 16, 11 fps
→ Camera output format (IIDC Format 7)* b/w-binning: 2 fold; 4 fold; 8 fold
→ Camera output format (IIDC Format 7)* image size (pixel): 717 x 525; 358 x 262; 179 x 131
→ Camera output format (IIDC Format 7)* frame rate: 25 fps; 41 fps; 62 fps
→ Camera output format (IIDC Format 7)* partial scan: Image size freely adjustable
→ Camera output (IIDC Format 2)* mode 2: 1280 x 960 pixels, 8 bit mono, 15 fps
→ Camera output (IIDC Format 2)* mode 6: 1280 x 960 pixels, 16 bit mono, 7.5 fpr
→ Exposure manual: 1 µs up to 120 s (Cooled camera : up to 20 min)
→ Exposure automatic (AE): 1 µs up to 66 ms at 1280 x 960 pixel
→ Power Supply: 9-36 V DC, 3 W
→ Development tool: Software development kit, Kappa sdk3 (.Net-class library/C-function library, API)
→ System: 12 bit digital
→ Gain: manual/automatic (AGC): 0 up to 18 dB
→ Enhancement contrast: 1.0 to 8.0 fold
→ Enhancement brightness: subtraction, 0 to 4095 LSB, maximum 50% of the output level
→ Enhancement edge: adjustable
→ Gamma: 0.3 up to 2.2
→ Diagnostics: Camera name, serail number, revision number, temperature of sensor and camera, built-in test, image size, frame rate, test patter
→ Line generator 2 reticles: position, color and style adjustable
→ Measuring window: position and size adjustable
→ Synchronization: internal/external, reset/restar (delay < 10 uµs)
→ Hardware Trigger: Minimum trigger delay 4.2 µs - 8.2µs depending on the sensor type Frame on demand
→ Software Trigger: via SDK 3
→ Interfaces: IEEE 1934a / FireWire, 2 ports (6-pin) with 400 Mbit/s system connector (power supply, additional RS 232, control and trigger signals)
→ Lens mount: C-mount, focal plane adjustable, CS-mount on request
→ Filter: IR-filter, removable
→ Temperature: operating temperature -20ºC to +60ºC, storage temperature -30ºC to + 70ºC
→ Dimensions | Weight block housing: 60 x 60 x 55 mm; 275 g
→ Dimensions | Weight design housing: diameter 75 mm, length 55; 410 g
→ Dimensions | Weight cooled camera: 73 x 69 x 115; 860 g
→ Cable length: FireWire cable up to 10 m
→ System requirements hardware: Connection 1394a OHCI (6 pin) or equivalent, minimum 1.8 GHz, minimum 512 MB RAM, DirectX9-enabled graphics card with at least 64 MB
→ System requirements operating system: Microsoft Windows 2000 ®, Microsoft Windows XP ® (32 Bit Edition), Microsoft Windows Vista ® (23 Bit Edition)
→ Standard equipment: Camera
→ In addition for cooled version: Power supply ACC 2 (incl. control cable 4 m and power supply cable)