Knox-Video RSII Series Switcher
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Levels: 1 v NTSC, Y/C, RGB
→ Frequency Response: DC to 30MHz
→ @ 1v <3db down at 30MHz
→ Input Impedance: 75 ohms
→ Output Impedance: 75 ohms
→ Crosstalk: less than –70db@5MHz
→ Connectors:
→ Video: BNC, Y/C uses 4 pin S-Video connector
→ Audio: RCA - Unbalanced
→ Weco Removable - Balanced
→ RS232/422: DB9 female
→ IP Control: RJ45
→ Unbalanced Audio Channels:
→ Levels: 2v p-p
→ Frequency Response: 20Hz through 30KHz
→ Input Impedance: 15Kohm
→ Output Impedance: 100 ohm
→ Crosstalk: less than –85db@1KHz
→ Balanced Audio Channels:
→ Levels: 0,4, or 16dB clipping at 18dB
→ Hum and Noise: Less than -90dB
→ Frequency Response: 20Hz through 50KHz +/- 1/4dB
→ Input Impedance: Bridging or 600 Ohm Termination
→ Output Impedance: 100 ohm
→ Crosstalk: less than –90db@20KHz
→ Connectors: Removable, screw terminal
→ Power Consumption: nominal 12v, 1.5 A from external switching power supply
→ Input Voltage: 100 to 240 VAC, 50/60Hz, .5A, 40 watts maximum
→ Dimensions: 19" wide by 3.5" high by 10" deep 2RU
→ Shipping weight: 12 pounds
→ Specifications subject to change without notice
→ Detachable Front Panel
→ Optional Volume and Tone Control
→ HD-SDI Switching
The KNOX VIDEO RS-II Series provides full-matrix switching of composite, Y/C (S-Video), HD component analog video, or SDI digital video. Active, fully buffered, high bandwidth crosspoint modules allow video to be switched simultaneously without crosstalk.
A dedicated reference sync input is provided with the composite video version, allowing a source of blackburst to be connected for glitch-free switching. The RSII series is available with low noise 3-wire balanced stereo audio or RCA-style unbalanced stereo audio. With the optional volume and tone package, sound adjustments control volume, bass, treble, balance, input trim and mute.
Adjust each output individually for optimal audio quality in any environment. Built-in salvo commands allow adjusting all zones at once . In addition to the standard RS232/422 serial control port, keep the system safe and secure with the standard faceplate or order the RSII with the optional Detachable Front Panel Controller.
Additional control options include a built-in IP (ethernet) control for operation over a LAN or
Internet. The RSII is fully compatible with third party control systems.
This Knox RS II series switchers accept up to sixteen composite, Y/C, HD component, or SDI
video sources, sixteen balanced or unbalanced stereo audio sources, and connects any one of the input
sources to one or more sixteen outputs with optional volume and tone control. Composite routers include a
second BNC connector for looping through to another device, such as a preview monitor.
Similar Models:
RS Series: 20Hz to 30KHz Frequency Response; Matrix Routing Switcher.
RSIII Series: DC to 30MHz Frequency Response; Matrix Routing Switcher.
