Knox-Video RSIII Series Switcher
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ RGBHV, RGB/RGB: up to QXGA
→ HD up to 1080p, SD NTSC, PAL, SECAM
→ Levels: 1V p-p
→ Frequency Response: DC to 300MHz
→ Input Impedance: 75 Ohms
→ Output Impedance: 75 Ohms
→ Crosstalk: less than -70dB@5MHz
→ Connectors: 75 Ohm female BNC
→ Optional RJ-45 female (CAT 5/6/nano-skew cable)
→ Maximum DC Input: +/-0.5V
→ Audio Channels:
→ Frequency Response:
→ +/- 0.1db 22Hz-22kHz
→ THD @1kHz:
→ 0dbu: 0.014%
→ +20 dbu: 0.022%
→ Max Input Level: +24 dbu
→ Max Output Level: +24 dbu
→ Gain: 0db (unity)
→ Input Imp./Unbal.: 15K Ohms, DC coupled
→ Input Imp./Bal.: 600 Ohms
→ Output Imp./Unbal.: 500 Ohms, DC coupled
→ Output Imp.Bal: 600 Ohms
→ Connectors: RCA, WECO
→ General:
→ Operating Temp.: 32F to 113F (0C to 45C)
→ Humidity: 10% to 90% non-condensing
→ MTBF: 20,000 hours
→ Shipping Weight: 10 pounds
→ Compliance: FCC Class A, CE, RoHS
→ Power: 1.0A, 50 watts, 171 BTU/hr.
→ Input Voltage: 100-240VAC, 50-60 Hz
→ Dimensions: 19" W x 5.25"H x 10"D, 3RU
→ UTP Transmission:
→ Cable: CAT 5/5e/6/nano-skew
→ Maximum Distance:
→ CAT 5/5e/6: 450 feet
→ Nano-skew: 1000 feet
→ Connector: RJ45
→ CAT-X Transmission
→ Volume and Tone Control
→ Configurable Audio
→ High Bandwidth
The Knox Video Technologies RS-III Series matrix switchers are designed to route RGBHV or RGB video signals
and balanced or unbalanced stereo audio signals. Available in matrix sizes from 4x8 to 12x8, the series features 300 MHz
bandwidth and can be used to route RGB, RGBS, RGsB, HDTV, component video, S-video and composite video signals.
This RS III series also features Knox's exclusive volume and tone attenuation on the matrix outputs. Audio inputs and outputs can
be custom configured for balanced or unbalanced devices. In addition to traditional RGBHV analog video and audio outputs,
the series offers optional integrated CAT-X transmitters to distribute signals long distances on low cost twisted pair
cable. Providing integrated CAT-X transmitters also alleviates cable management issues within the rack while reducing the
potential for faulty BNC terminations.
Similar Models:
RS Series: 20Hz to 30KHz Frequency Response; Matrix Routing Switcher.
RSII Series: 20Hz to 50KHz Frequency Response; Matrix Routing Switcher.
