Search
http://www.avsupply.com/images/logos/epix-logo.gif
EPIX Imaging Processing for Research
Imaging Processing for Research & Industry
Found 50 items for Manufactuer:
"EPIX":
Filter by: No filter set (showing all) 15 items per page.
Page 1 of 4
Featured
Model Number A..Z
Model Number Z..A
Showing All
Page:
pixci-a310.jpg
EPIX: pixci-a310

PCIe X4 Frame Grabber For High Resolution, High Quality, Analog Video

The EPIX Analog Video for PCI Express PIXCI-A310 video frame grabber acquires images from monochrome or component RGB color, interlaced or progressive scan, from cameras or other...

Video Formats    UXGA, WSGA , WXGA, SXGA , SXGA, XGA, SVGA, VGA, RS343, CCIR, RS-170, and others
Supported Resolutions Include    1920x1080p, 1920x1080i, 1280x720p, 720x480p, 720x576p, and others
Bit Depth    30, 24, 10, or 8 bits per pixel
Pixel Clock Range    12 MHz to 165 MHz
Maximum PCIe Data Rate    700 Megabyte per second sustained data transfer
pixci cl1.jpg
EPIX: pixci-cl1

Camera Link Interface

The EPIX Camera Link for PCI PIXCI-CL1 accepts data from a Camera Link camera while providing exposure, reset, and serial control. The PIXCI ® CL1 capture and control board...

Resolution    8 to 4,096 pixels per line; 1 to 4,096 lines per image (area scan); 1 to 65,534 lines per image (line scan)
Signals    Differential RS-644; Differential Trigger IN / Strobe OUT; 2 TTL input/outputs
Connections    1 26-pin Camera Link; 1 9-pin D-Subminiature; 2 10-pin headers
Maximum frame rate    Camera Dependent
CE / FCC Certification    PIXCI CL1 was tested per EMC directive 89/336/EEC and performed to class B
pixci cl2.jpg
EPIX: pixci-cl2

64-Bit/66MHz PCI Interface Board For Full, Medium & Base Configuration Camera Link Cameras

The EPIX Camera Link for PCI PIXCI-CL2 frame grabber supports Full, Medium, and Base configuration Camera Link cameras. Compatible with the 64-bit/ 66MHz PCI bus, the CL2 board...

PCI Bus    64-bit/66MHz or PCI-X
pixci d2x.jpg
EPIX: pixci-d2x

Frame Grabber Supports Over 300 Digital Output Cameras

The EPIX Camera Link for PCI PIXCI-D2X is designed for scientific and machine vision applications that require the highest image quality. To insure that precise camera data is...

Resolution    8 to 4,096 pixels per line, 1 to 4,096 lines per image (area scan), 1 to 65,534 lines per image (line scan)
Signals    Differential RS-644 or RS-422 camera / board signaling (camera dependent). Differential Trigger IN / Strobe OUT 2
Maximum frame rate    Camera Dependent
Connections    1 68-pin (SCSI II) cable receptacle, 2 10-pin headers
CE / FCC Certification    PIXCI D2X was tested per EMC directive 89/336/EEC and performed to class B.
pixci d3x.jpg
EPIX: pixci-d3x

Frame Grabber Supports Over 24 Multi-Channel Digital Output Cameras

The EPIX Camera Link for PCI PIXCI-D3X is a PCI-compatible imaging board supporting camera configurations with 3 to 8 data channels, or with 30 to 64 total data bits - cameras...

Resolution    8 to 4,096 pixels per line, 1 to 4,096 lines per image (area scan), 1 to 65,534 lines per image (line scan)
Signals    Differential RS-644, Differential Trigger IN / Strobe OUT (Optional "TTL Module" allows TTL Trigger IN and TTL Strobe OUT)
Connections    1 100-pin cable receptacle, 2 10-pin headers
Maximum frame rate    Camera Dependent
CE / FCC Certification    PIXCI D3X was tested per EMC directive 89/336/EEC and performed to class B.
pixci_e104x4.jpg
EPIX: plxcl-e104x4

Embedded Camera Link Applications PCIe/104 Frame Grabber

The EPIx PIxCI e104x4 is a PCIe/104 Frame Grabber For Embedded Camera Link Applications.


SIGNAL INPUT & OUTPUT    EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz.
CONNECTIONS    Four 26 pin MDR Camera Link connectors for up to four Base cameras or one or two 10 tap, Full, or Medium cameras.
Two 10 pin headers for trigger inputs and strobe outputs.
BUS REQUIREMENTS    Type 1 Bottom-Stacking PCIe/104 V2.01 With Gen 2.0 Protocol (2.5 to 5 GT/s)
POWER REQUIREMENTS    12 V @ 120 mA
3.3 V @ 720 mA
Total 3.816 Watts
DIMENSIONS    11.56 cm long by 9.59 cm high (4.55"" long x 3.775"" high)
pixci-e4db.jpg
EPIX: pixci-e4db

Dual Base Camera Link Frame Grabber For PCI Express

The EPIX Camera Link for PCI Express PIXCI-E4DB frame grabber connects two Base camera link cameras to the PCI Express bus. The PIXCI E4DB is handled by EPIX software as if two...

pixci-e8.jpg
EPIX: pixci-e8

PCI Express X8 Frame Grabber For High Bandwidth Camera Link Cameras

The EPIX Camera Link for PCI Express PIXCI-E8 is a Camera Link frame grabber supporting the highest data rate cameras. The PIXCI E8 supports more than 900 Extended, Full, Medium,...

pixci-eb1.jpg
EPIX: pixci-eb1

Low Cost & Profile, PoCL Base Camera Link PCI Express Frame Grabber

The EPIX Camera Link for PCI Express PIXCI-EB1 is a low cost, low profile frame grabber with Power over Camera Link (PoCL). The PIXCI EB1P is compatible with all area scan and...

Signal Input & Output    EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz
Conections    One 26-pin 3M MDR Camera Link connector for Base. 6-pin connector for Trigger, Frame Enable, and Strobe. Camera Link cables available
Data Transfers    Supports cameras with data output rates up to 250 MBytes/second. 64-bit memory addressing
Bus Requirements    PCI Express x1 slot. Operates in PCI Express x16, x8, x4, or x1 slot
Dimesions    8.38 cm long by 6.88 cm high (3.30" long x 2.71" high)
pixci-eb1mini.jpg
EPIX: pixci-eb1mini

Smallest Camera Link Frame Grabber

The PIXCI EB1mini frame grabber provides a vertical Camera Link SDR connector with FPGA on a single printed circuit board using a full size mini card slot. At the maximum Camera...

pixci eb1minif.jpg
EPIX: pixci-eb1minif

Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniF moves the Camera Link connector to a separate board and connects the two with detachable flat ribbon cable. This allows for more mounting options in space...

pixci eb1minig.jpg
EPIX: pixci-eb1minig

Smallest Camera Link Frame Grabber Series

The  PIXCI EB1miniG  has the Camera Link connector on a separate circuit board and connects to the FPGA circuit board with two very flexible cables. This version requires less...

pixci eb1minih.jpg
EPIX: pixci-eb1minih

Smallest Camera Link Frame Grabber Series

The PIXCI EB1miniH has an SDR Camera Link connector and FPGA on a separate circuit board for mounting to the side of a small chassis. Two very flexible cables connect to a half...

pixci-ec1.jpg
EPIX: pixci-ec1

ExpressCard - Notebook Camera Link Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI-EC1 frame grabber supports all Full, Medium, and Base configuration Camera Link cameras with bandwidth requirements of 191 Megabytes...

pixci-ecb1.jpg
EPIX: pixci-ecb1

ExpressCard - Notebook Base Camera Link Frame Grabber

The EPIX Camera Link for ExpressCard PIXCI-ECB1 frame grabber supports all Base configuration Camera Link cameras with bandwidth requirements of 191 Megabytes (1528 Mbits) per...



facebook.png twitter.png linkedin.png youtube.png
Prices and specifications subject to change without notice.