NVT NV-1613 16-Channel Passive Transceiver Hub

→ Video Frequency response: DC to 10 MHz
→ Video Attenuation: 0.5 dB typ
→ Video Common-mode / Differential-mode rejection: 15 KHz to 5 MHz 60 dB typ
→ Video Impedance Coax, female BNC: 75 ohms
→ Video Impedance UTP, Screw terminal block or RJ45: 100 ohms
→ Network Wiring One Unshielded Twisted Pair: 24-16 AWG (0,5-1,31mm)
→ Wire Category Type: 2 or better
→ Wire Impedance: 100 ± 20 ohms
→ Wire DC Loop Resistance: 52 ohms per 1,000ft (18 ohms per 100m)
→ Wire Differential Capacitance: 19 pF/ft max (62 pF/m max)
→ Power: No external power require
→ Ambient temperature: -22 to 167 °F (-30 to 75 °C)
→ Humidity (non-condensing): 0 to 95%
→ Transient Immunity: per ANSI / IEEE 587 C62.41
→ Dimensions, excluding brackets and connectors: 17in wide, 1.7in high, 8.125in deep
→ Packaged weight: 4.2bs (1,7kg)
→ Mounting: Wall, desk or rack mount
→ Mounting: Rack mount "L" brackets for front, rear, or wall installations; rubber feet for desk applications
→ Cables: Eight 2ft (60cm) coax jumpers and one 7ft (200cm)
→ Adaptors: Four NV-RJ45A RJ45 to screw-terminal adaptors
→ High-Density 19" 1U high enclosure features 16 ports
→ Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver for full motion CCTV at distances up to 750ft (225m)
→ Use with any NVT DigitalEQ™ or active receiver hub as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
→ Use with any NVT StubEQ™ for distances up to 1,500ft (460m)
→ RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors included
→ No power required
→ Exceptional interference rejection
→ Built-in transient protection
→ Supports "up-the coax" type control signal up to 750ft (225m)
→ Compatible with qualified UTP cameras
→ Includes sixteen 2ft (60cm) coax jumper cables and rackmount hardware
→ Limited lifetime warranty