NVT NV-213A Single Channel Video Passive Transceiver

→ Video Frequency response: DC to 10 MHz
→ Video Attenuation: 0.5 dB typ
→ Video Common-mode / Differential-mode rejection: 15 KHz to 5 MHz 60 dB type
→ Video Impedance Coax, male BNC: 75 ohms
→ Video Impedance UTP, Screwless terminal block: 100 ohms
→ Power: No external power required
→ Ambient ambient: -22 to 167 °F (-30 to 75 °C)
→ Humidity (non-condensing): 0 to 95%
→ Transient Immunity: per ANSI / IEEE 587 C62.41
→ Network Wiring: One Unshielded Twisted Pair 24-16 AWG (0,5-1,31mm)
→ Wire Category Type: 2 or better
→ Wire Impedance: 100 ± 20 ohms
→ Wire DC Loop Resistance: 52 ohms per 1,000ft (18 ohms per 100m)
→ Wire Differential Capacitance: 19 pF/ft max (62 pF/m max)
→ Dimensions, excluding brackets and connectors: 3.00 x 1.54 x 1.10in (76 x 39 x 28mm)
→ Packaged weight: 4.0oz (100g)
→ Material: Black ABS
→ Mounting: Two 0.175in (4,4mm) diameter holes 2.5in (63,5mm) apart
→ Product weight: 4.0oz (100g)
→ Packaged weight: 4.0oz (100g)
→ Up to ten NV-213A's can be mounted to an NV-RM 8/10 Rackmount Panel
→ Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
→ Up to 3,000ft (1km) with a NVT DigitalEQ hub or active receiver
→ Up to 1,500ft (460m) with a NVT StubEQ hub
→ Mini-coax pigtail supports in-camera mounting in most dome cameras
→ No power required
→ Exceptional interference rejection
→ Frequency Response DC to 10 MHz
→ Built-in transient protection with separate ground connection
→ Supports "up-the-coax" type control signal up to 750ft (225m)
→ Limited lifetime warranty