NVT NV-215J-M Single Channel Passive Video Transceiver - RJ45
Offering Wholesale, OEM, USA / International, GSA Government / Educational, Reseller / Retail, & Quantity Prices and Specifications / Datasheets, Installation Guides, and Operational Manuals.
Price Documents
→ Video Attenuation: 0.5 dB typ
→ Video Common-mode / Differential-mode rejection: 15 KHz to 5 MHz 60 dB typ
→ Video Impedance Coax, male BNC: 75 ohms
→ Video Impedance UTP, RJ45: 100 ohms
→ Power: No external power required
→ Ambient ambient temperature: -22 to +167 °F (-30 to +75 °C)
→ Humidity (non-condensing): 0 to 95%
→ Transient Immunity: per ANSI / IEEE 587 C62.41
→ Network Wiring One Unshielded Twisted Pair: 24-22 AWG (0,5-0,64mm)
→ Wire Category Type: 2 or better
→ Wire Impedance: 100 ± 20 ohms
→ Wire DC Loop Resistance: 52 ohms per 1,000ft (18 ohms per 100m)
→ Wire Differential Capacitance: 19 pF/ft max (62 pF/m max)
→ Body Length: 1.8in (45mm)
→ Body Height: 1.0in (26mm)
→ Body Width: 1.65in (42mm)
→ Product Weight: 2.0oz (60g)
→ Packaged Weight: 0.14lb (63g)
→ Full-motion CCTV video at distances up to 750ft (225m) when used with any Passive NVT Transceiver or hub
→ Up to 1,500 feet (460m) shall be supported by any NVT StubEQ™ Hub
→ Up to 3,000 feet (1,000m) with a DigitalEQ™ Hub or NVT Active Receiver
→ Frequency response DC to 10MHz
→ Mini-coax pigtail supports in-camera mounting in most dome cameras
→ RJ45 UTP terminal connection
→ No power required
→ Exceptional interference rejection
→ Built-in transient protection
→ Supports "up-the-coax" type control signal up to 750ft (225m)
→ Limited lifetime warranty
The NVT Single Channel Video Passive Transceiver RJ45 NV 215J M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The passive NV-215J-M has a 9" mini-coax pigtail lead which allows in-camera enclosure mounting in most dome cameras and a RJ45 for connection to UTP wire. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT's passive products for applications under 750ft (225m). The NV-215J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV215JM allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
Similar Models:
NV-217J-M: Male BNC allows connection directly to the camera or DVR.
